FireCADCalc

Mixer and Splitter Mass Balance

Combined flow and composition of up to three streams mixed together, and the two outlet streams when the mixture is split in a chosen ratio.

Refinery and petrochemicalChemical and fertiliserFood, dairy and textile

Inputs

Examples: Two streams split 70/30Three streams to one outlet

Stream 1

Stream 2

Stream 3

Results

A splitter divides flow only; both outlets have the mixed composition.

Mixed flow1,500.0kg/h
Mixed composition30.000%
Component flow450.00kg/h
Outlet A1,050.0kg/h
Outlet B450.00kg/h

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Two streams split 70/30. The inputs, in the units selected above:

InputValue
Stream 1: mass flow1,000.0 kg/h
Stream 1: component mass fraction40.000 %
Stream 2: mass flow500.00 kg/h
Stream 2: component mass fraction10.000 %
Stream 3: mass flow0 kg/h
Stream 3: component mass fraction0 %
Share sent to outlet A70.000 %

Applying the formula below gives:

ResultValue
Mixed flow1,500.0 kg/h
Mixed composition30.000 %
Component flow450.00 kg/h
Outlet A1,050.0 kg/h
Outlet B450.00 kg/h

Open this example in the calculator and change any input.

Formula

\(\dot m = \sum \dot m_i, \quad x = \frac{\sum \dot m_i x_i}{\dot m}, \quad \dot m_A = s\dot m\)

Variables

Symbol Meaning SI unit
\(\dot m_{1}\) Stream 1: mass flow kg/s
\(x_{1}\) Stream 1: component mass fraction -
\(\dot m_{2}\) Stream 2: mass flow kg/s
\(x_{2}\) Stream 2: component mass fraction -
\(\dot m_{3}\) Stream 3: mass flow kg/s
\(x_{3}\) Stream 3: component mass fraction -
\(s\) Share sent to outlet A -
\(\dot m\) Mixed flow kg/s
\(x\) Mixed composition -
\(\dot m_c\) Component flow kg/s
\(\dot m_A\) Outlet A kg/s
\(\dot m_B\) Outlet B kg/s

Method and standards

Mass balances.

Where it is used

  • Blending tanks and headers.
  • Process flow sheets.

Common mistakes

  • Averaging fractions without weighting by flow.
  • Volume for mass.

Assumptions and limits

  • Steady state.

References

  • Total and component mass balances

Questions and answers

1000 kg/h at 40 % with 500 kg/h at 10 %?

1500 kg/h at 30 %; split 70/30 gives 1050 and 450 kg/h.

Different components?

Run the balance for each component.

Energy too?

Use the two-stream mixing calculator for temperature.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.