Worked example
Example: Natural gas: 90 % CH4, 5 % C2H6, 2 % C3H8, 0.5 % C4H10, 1 % CO2, 1.5 % N2. The inputs, in the units selected above:
| Input | Value |
|---|---|
| CH₄ methane, mole % | 90.000 % |
| C₂H₆ ethane, mole % | 5.0000 % |
| C₃H₈ propane, mole % | 2.0000 % |
| C₄H₁₀ butane, mole % | 0.50000 % |
| H₂ hydrogen, mole % | 0 % |
| CO carbon monoxide, mole % | 0 % |
| CO₂ carbon dioxide, mole % | 1.0000 % |
| N₂ nitrogen, mole % | 1.5000 % |
| O₂ oxygen, mole % | 0 % |
| H₂O water vapour, mole % | 0 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Molar mass of the mixture | 17.975 kg/kmol |
| Density at 0 °C and 1.01325 bar | 0.80196 kg/m³ |
| Specific gravity (air = 1) | 0.62056 |
| Specific gas constant | 0.46256 kJ/(kg·K) |
| Sum of the entered percentages | 100.00 % |
Open this example in the calculator and change any input.
Formula
\(M = \frac{\sum y_i M_i}{\sum y_i} \qquad \rho_n = \frac{M}{V_{m,n}} \qquad SG = \frac{M}{M_{air}} \qquad R_s = \frac{R_u}{M}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(y_{CH4}, y_{C2H6}, y_{C3H8}, y_{C4H10}, y_{H2}, y_{CO}, y_{CO2}, y_{N2}, y_{O2}, y_{H2O}\) | mole fractions of each gas | – |
| \(M\) | mixture molar mass | kg/kmol |
| \(\rho_n\) | density at 0 °C, 1.01325 bar | kg/m³ |
| \(SG\) | specific gravity (air = 1) | – |
| \(R_s\) | specific gas constant | J/(kg·K) |
| \(\Sigma y\) | sum entered | – |
| \(M_i\) | molar mass of each gas | kg/kmol |
| \(V_{m,n}\) | molar volume at normal conditions | m³/kmol |
| \(R_u\) | universal gas constant | J/(kmol·K) |
Method and standards
Mole-fraction weighting of IUPAC 2013 molar masses; ideal-gas molar volume at 0 °C and 1 atm.
Where it is used
- Gas flow meter settings.
- Burner and gas train design.
- Biogas and producer gas handling.
Common mistakes
- Using mass percent as mole percent.
- Using ideal gas at high pressure.
- Confusing normal (0 °C) and standard (15 °C) conditions.
Assumptions and limits
- Ideal gas; real-gas compressibility not included. Natural gas at normal conditions has Z of about 0.997–0.998, so its real normal density (ISO 6976) is about 0.2–0.3 % higher than shown.
References
- IUPAC 2013 atomic masses; ideal gas
Questions and answers
What is the molar mass of a typical natural gas?
90 % CH₄, 5 % C₂H₆, 2 % C₃H₈, 0.5 % C₄H₁₀, 1 % CO₂ and 1.5 % N₂ give 17.98 kg/kmol, 0.802 kg/Nm³ and specific gravity 0.621.
Volume or mass percent?
Mole percent, which equals volume percent for ideal gases.
Why might they not add to 100?
Analysis rounding; the results are normalised and a warning shows.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.