Worked example
Example: Steel at 20 °C, face to 100 °C, 20 mm, 10 min. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Initial uniform temperature | 20.000 °C |
| Surface temperature held from time zero | 100.00 °C |
| Depth below the surface | 20.000 mm |
| Time | 600.00 s |
| Thermal diffusivity | 12.000 mm²/s |
| Conductivity (for the surface heat flux) | 45.000 W/(m·K) |
Applying the formula below gives:
| Result | Value |
|---|---|
| Temperature at the depth | 89.411 °C |
| Similarity variable x/(2√(α t)) | 0.11785 |
| Penetration depth 4√(α t) | 339.41 mm |
| Surface heat flux at the time | 23.937 kW/m² |
Open this example in the calculator and change any input.
Formula
\(\frac{T(x,t) - T_s}{T_i - T_s} = \operatorname{erf}\frac{x}{2\sqrt{\alpha t}}, \quad q''_s = \frac{k (T_s - T_i)}{\sqrt{\pi\alpha t}}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(T_i\) | Initial uniform temperature | K |
| \(T_s\) | Surface temperature held from time zero | K |
| \(x\) | Depth below the surface | m |
| \(t\) | Time | s |
| \(\alpha\) | Thermal diffusivity | m²/s |
| \(k\) | Conductivity (for the surface heat flux) | W/(m·K) |
| \(T(x,t)\) | Temperature at the depth | K |
| \(\eta\) | Similarity variable x/(2√(α t)) | - |
| \(\delta_p\) | Penetration depth 4√(α t) | m |
| \(q''_s\) | Surface heat flux at the time | W/m² |
Method and standards
Similarity solution of transient conduction.
Where it is used
- Refractory warm-up, soil and frost depth.
- Heat transfer examinations.
Common mistakes
- Using it for thin walls.
- Diffusivity in wrong units.
Assumptions and limits
- Constant properties, constant surface temperature.
References
- Incropera
- DeWitt
- Bergman and Lavine
- Fundamentals of Heat and Mass Transfer
- ch. 5 (semi-infinite solid, constant surface temperature)
Questions and answers
Steel suddenly at 100 °C on its face: temperature 20 mm in after 10 min?
About 89 °C with α 12 mm²/s.
What is the penetration depth?
4√(αt): beyond it the change is under 0.5 %.
Why does heat flux fall with time?
It goes as 1/√t as the heated layer thickens.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.