FireCADCalc

BOD Exerted over Time and Ultimate BOD (First Order)

Ultimate BOD from a BOD₅ value and rate constant, and the BOD exerted after any number of days, by first-order kinetics (base e).

Refinery and petrochemicalChemical and fertiliserPulp and paperFood, dairy and textile

Inputs

Examples: BOD5 200, k 0.23/d, 10 daysSlow industrial, k 0.1/d

Results

Ultimate BOD (mg/L)292.67
BOD exerted at t (mg/L)263.33
BOD₅ share of ultimate68.336%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: BOD5 200, k 0.23/d, 10 days. The inputs, in the units selected above:

InputValue
BOD₅ (mg/L)200.00 -
Rate constant (base e)0.23000 1/d
Time of interest10.000 d

Applying the formula below gives:

ResultValue
Ultimate BOD (mg/L)292.67
BOD exerted at t (mg/L)263.33
BOD₅ share of ultimate68.336 %

Open this example in the calculator and change any input.

Formula

\(BOD_t = L_0\left(1 - e^{-kt}\right), \quad L_0 = \frac{BOD_5}{1 - e^{-5k}}\)

Variables

Symbol Meaning SI unit
\(BOD_5\) BOD₅ (mg/L) -
\(k\) Rate constant (base e) 1/s
\(t\) Time of interest s
\(L_0\) Ultimate BOD (mg/L) -
\(BOD_t\) BOD exerted at t (mg/L) -
\(BOD_5/L_0\) BOD₅ share of ultimate -

Method and standards

First order.

Where it is used

  • Effluent oxygen demand.
  • Examinations.

Common mistakes

  • Base-10 k used as base e.
  • Days vs seconds.

Assumptions and limits

  • Carbonaceous BOD only.
  • BOD₅ is the 5-day test at 20 °C. Do not enter the Indian 3-day, 27 °C BOD (IS 3025) as BOD₅: its incubation time and rate constant differ.

References

  • BOD_t = L₀(1 − e^(−kt)) (first-order BOD kinetics, Metcalf & Eddy)

Questions and answers

BOD₅ 200 with k 0.23/d?

Ultimate about 293 mg/L; 263 after 10 days.

Base 10 constants?

Multiply a base-10 k by 2.303.

Nitrogenous demand?

Appears after a week or so and is not in this first-order model.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.