FireCADCalc

First-Order Decay: Half-Life and Amount Remaining

Half-life, mean life and the amount remaining after a time for first-order decay (reaction, radioactive or residual chemical), from k or the half-life.

Refinery and petrochemicalChemical and fertiliser

Inputs

Examples: Half-life 8 h, 24 h laterk 0.1 per hour, 10 h

Results

Rate constant0.0866431/h
Half-life8.0000h
Mean life 1/k11.542h
Amount remaining12.500
Fraction remaining12.500%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Half-life 8 h, 24 h later. The inputs, in the units selected above:

InputValue
Value givenHalf-life
Rate constant0.10000 1/h
Half-life8.0000 h
Initial amount (any unit)100.00 -
Elapsed time24.000 h

Applying the formula below gives:

ResultValue
Rate constant0.086643 1/h
Half-life8.0000 h
Mean life 1/k11.542 h
Amount remaining12.500
Fraction remaining12.500 %

Open this example in the calculator and change any input.

Formula

\(N = N_0 e^{-kt}, \quad t_{1/2} = \frac{\ln 2}{k}, \quad \tau = \frac{1}{k}\)

Variables

Symbol Meaning SI unit
\(\text{given}\) Value given -
\(k\) Rate constant 1/s
\(t_{1/2}\) Half-life s
\(N_0\) Initial amount (any unit) -
\(t\) Elapsed time s
\(\tau\) Mean life 1/k s
\(N\) Amount remaining -
\(N/N_0\) Fraction remaining -

Method and standards

First-order kinetics.

Where it is used

  • Decay of residual chemicals and tracers.
  • Radioactive sources in level and density gauges.

Common mistakes

  • log₁₀ instead of ln.
  • Using it for higher orders.

Assumptions and limits

  • First order.

References

  • First-order decay N = N₀ e^(−kt)
  • t½ = ln 2/k

Questions and answers

Half-life 8 h, after 24 h?

One-eighth remains: 12.5 %.

Mean life?

1/k, about 1.44 half-lives.

Second-order reactions?

Their half-life depends on concentration; this page is first order only.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.