Worked example
Example: First order to 95 %. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Target conversion | 95.000 % |
| Reaction order | 1.0000 - |
| Rate constant k·C_A0^(n−1) | 0.50000 1/h |
| Turnaround (fill, heat, empty, clean) | 2.0000 h |
Applying the formula below gives:
| Result | Value |
|---|---|
| Reaction time | 5.9915 h |
| Cycle time | 7.9915 h |
| Batches per day | 3.0032 |
Open this example in the calculator and change any input.
Formula
\(t = \frac{(1 - X)^{1-n} - 1}{(n - 1)k'} \ (n \ne 1), \quad t = -\frac{\ln(1 - X)}{k'} \ (n = 1)\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(X\) | Target conversion | - |
| \(n\) | Reaction order | - |
| \(k'\) | Rate constant k·C_A0^(n−1) | 1/s |
| \(t_a\) | Turnaround (fill, heat, empty, clean) | s |
| \(t_r\) | Reaction time | s |
| \(t_c\) | Cycle time | s |
| \(N_d\) | Batches per day | - |
Method and standards
Integrated rate law.
Where it is used
- Batch reactors and digesters.
- Production planning.
Common mistakes
- Rate constant units for n ≠ 1.
- Forgetting turnaround.
Assumptions and limits
- Isothermal, constant volume.
- k′ is the lumped constant k C_A0^(n−1) in 1/time; convert a rate constant in concentration units first.
References
- Integrated rate law for −r_A = k C_A^n at constant volume (Levenspiel, Chemical Reaction Engineering)
Questions and answers
95 % at first order, k 0.5 /h?
6.0 h of reaction; with 2 h turnaround 3.0 batches a day.
Why does the last few per cent take so long?
The rate falls as the reactant runs out.
Zero order?
Time is simply X/k' (with k' = k/C_A0).
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.