Worked example
Example: 4 mm sphere, k 5 /s, De 1e-7. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Pellet shape | Sphere |
| Sphere diameter or slab thickness | 4.0000 mm |
| First-order rate constant per pellet volume | 5.0000 Hz |
| Effective diffusivity in the pellet | 1.0000e-07 m²/s |
Applying the formula below gives:
| Result | Value |
|---|---|
| Characteristic length V/S | 0.66667 mm |
| Generalised Thiele modulus | 4.7140 |
| Effectiveness factor | 19.713 % |
| Observed rate constant | 0.98566 Hz |
Open this example in the calculator and change any input.
Formula
\(\phi = L_c\sqrt{\frac{k_v}{D_e}}, \ L_c = \frac{V_p}{S_p}\ (\text{sphere } d_p/6,\ \text{slab, both faces } d_p/2), \quad \eta_{sphere} = \frac{1}{3\phi^2}\left(\frac{3\phi}{\tanh3\phi} - 1\right), \quad \eta_{slab} = \frac{\tanh\phi}{\phi}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\text{shape}\) | Pellet shape | - |
| \(d_p\) | Sphere diameter or slab thickness | m |
| \(k_v\) | First-order rate constant per pellet volume | 1/s |
| \(D_e\) | Effective diffusivity in the pellet | m²/s |
| \(L_c\) | Characteristic length V/S | m |
| \(\phi\) | Generalised Thiele modulus | - |
| \(\eta\) | Effectiveness factor | - |
| \(\eta k_v\) | Observed rate constant | 1/s |
Method and standards
Generalised Thiele modulus.
Where it is used
- Catalyst size and shape selection.
- Diagnosing pore-diffusion limits.
Common mistakes
- Using bulk diffusivity instead of effective.
- Rate constant per mass instead of per pellet volume.
Assumptions and limits
- Isothermal; first order.
References
- Levenspiel
- Chemical Reaction Engineering
- 3rd ed. (Wiley, 1999)
- ch. 18 (effectiveness factor and generalised Thiele modulus)
- Fogler
- Elements of Chemical Reaction Engineering
- 5th ed.
- ch. 15
Questions and answers
What does an effectiveness factor of 0.3 mean?
The pellet reacts at 30 % of the rate it would if the whole interior saw the surface concentration; the core is starved by slow diffusion.
How can I raise it?
Smaller pellets, more porous supports or egg-shell catalysts with the active metal near the surface.
What do the defaults represent?
A 4 mm spherical pellet with a fast first-order reaction.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.