Worked example
Example: First order, 80 %. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Feed volumetric flow | 10.000 m³/h |
| Target conversion | 80.000 % |
| Reaction order | First order |
| Rate constant k·C_A0^(n−1) | 0.20000 1/min |
Applying the formula below gives:
| Result | Value |
|---|---|
| Space time | 8.0472 min |
| Reactor volume | 1.3412 m³ |
| CSTR volume for the same duty | 3.3333 m³ |
Open this example in the calculator and change any input.
Formula
\(\tau = -\frac{\ln(1 - X)}{k} \ (n = 1), \quad \tau = \frac{X}{k C_{A0}(1 - X)} \ (n = 2)\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\dot V\) | Feed volumetric flow | m³/s |
| \(X\) | Target conversion | - |
| \(n\) | Reaction order | - |
| \(k'\) | Rate constant k·C_A0^(n−1) | 1/s |
| \(\tau\) | Space time | s |
| \(V\) | Reactor volume | m³ |
| \(V_{CSTR}\) | CSTR volume for the same duty | m³ |
Method and standards
Integrated design equation.
Where it is used
- Tubular reactors and long pipelines.
- Comparing reactor types.
Common mistakes
- Using it for gas reactions with mole change.
- Wrong rate units.
Assumptions and limits
- Isothermal, constant density.
References
- PFR design equation V = F_A0 ∫dX/(−r_A) integrated for n = 1
- 2 (Fogler; Levenspiel)
Questions and answers
10 m³/h, 80 %, first order k 0.2 /min?
τ = 8.05 min: 1.34 m³, against 3.33 m³ as a CSTR.
Why is a PFR smaller?
Concentration falls gradually along it, keeping the rate high upstream.
Real tubular reactors?
Some back-mixing; use dispersion models for long, slow ones.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.