Worked example
Example: 0.40 % C steel below 727 °C. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Overall alloy composition (wt %) | 0.40000 % |
| Composition of phase α, tie-line end (wt %) | 0.020000 % |
| Composition of phase β, tie-line end (wt %) | 0.77000 % |
| Alloy mass | 100.00 kg |
Applying the formula below gives:
| Result | Value |
|---|---|
| Mass fraction of α | 49.333 % |
| Mass fraction of β | 50.667 % |
| Mass of α | 49.333 kg |
| Mass of β | 50.667 kg |
Open this example in the calculator and change any input.
Formula
\(W_\alpha = \frac{C_\beta - C_0}{C_\beta - C_\alpha}, \quad W_\beta = \frac{C_0 - C_\alpha}{C_\beta - C_\alpha}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(C_0\) | Overall alloy composition | - |
| \(C_\alpha\) | Composition of phase α (tie-line end) | - |
| \(C_\beta\) | Composition of phase β (tie-line end) | - |
| \(m\) | Alloy mass | kg |
| \(W_\alpha\) | Mass fraction of α | - |
| \(W_\beta\) | Mass fraction of β | - |
| \(m_\alpha\) | Mass of α | kg |
| \(m_\beta\) | Mass of β | kg |
Method and standards
Mass balance.
Where it is used
- Microstructure estimates for steels and alloys.
- Teaching and exam problems.
Common mistakes
- Reading tie-line ends at the wrong temperature.
- Using atomic instead of weight per cent.
Assumptions and limits
- Equilibrium; binary system.
- Compositions in weight per cent give mass fractions of the phases; compositions in atomic per cent would give mole (atom) fractions instead.
References
- Lever rule (mass balance along a tie line; Callister, Materials Science and Engineering, ch. 9)
Questions and answers
Why is it called the lever rule?
The phase fractions balance like weights on a lever with the fulcrum at the alloy composition.
What does the default show?
The fraction of proeutectoid ferrite and pearlite in a 0.40 % C steel just below 727 °C.
What do the defaults represent?
A 0.40 % carbon steel between ferrite (0.02 % C) and pearlite (0.77 % C).
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.