Worked example
Example: Iron, 500 µA/cm² at 150 mV, 120 mV/dec. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Measured current density on the Tafel line (µA/cm²) | 500.00 - |
| Overpotential from E_corr (mV) | 150.00 - |
| Tafel slope of that branch (mV/decade) | 120.00 - |
| Equivalent weight (g per equivalent) | 27.920 kg/kmol |
| Metal density | 7,870.0 kg/m³ |
Applying the formula below gives:
| Result | Value |
|---|---|
| Corrosion current density (µA/cm²) | 28.117 |
| Corrosion rate (mm/year) | 0.32625 |
Open this example in the calculator and change any input.
Formula
\(i_{corr} = \frac{i}{10^{|\eta|/\beta}}, \quad CR = \frac{i_{corr}EW}{F\rho}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(i\) | Measured current density on the Tafel line (µA/cm²) | - |
| \(|\eta|\) | Overpotential from E_corr (mV) | - |
| \(\beta\) | Tafel slope of that branch (mV/decade) | - |
| \(EW\) | Equivalent weight (g per equivalent) | kg/kmol |
| \(\rho\) | Metal density | kg/m³ |
| \(i_{corr}\) | Corrosion current density (µA/cm²) | - |
| \(CR\) | Corrosion rate (mm/year) | - |
Method and standards
Tafel equation.
Where it is used
- Laboratory corrosion tests.
- Comparing inhibitors.
Common mistakes
- Using points too near E_corr.
- Ignoring IR drop.
Assumptions and limits
- Activation-controlled branch.
- Current densities are plain numbers in µA/cm², the overpotential in mV and the Tafel slope in mV/decade, in every unit system; the corrosion rate is in mm/year (1 mm/year = 39.4 mpy).
References
- Tafel equation η = β log(i/i_corr); Faraday's law per ASTM G102; Jones
- Principles and Prevention of Corrosion
- 2nd ed. (Prentice Hall, 1996)
Questions and answers
Why extrapolate?
At E_corr the anodic and cathodic currents cancel; the corrosion current is found by extending a Tafel line back to E_corr.
Which branch should I use?
The cleaner linear branch, often the cathodic one in deaerated acid, the anodic one where oxygen diffusion controls.
What do the defaults represent?
A point 150 mV from E_corr at 500 µA/cm² on a 120 mV/decade branch, for iron.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.