Worked example
Example: 0.7 natural gas, 2000 psia, 150 °F. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Gas gravity (air = 1) | 0.70000 - |
| Gas type | Natural gas |
| Pressure (absolute) | 2,000.0 psi |
| Temperature | 65.556 °C |
Applying the formula below gives:
| Result | Value |
|---|---|
| Pseudo-critical temperature | -56.831 °C |
| Pseudo-critical pressure | 669.12 psi |
| Pseudo-reduced temperature | 1.5658 |
| Pseudo-reduced pressure | 2.9890 |
| Compressibility factor | 0.81003 |
| Gas density | 122.54 kg/m³ |
| Gas formation volume factor (reservoir m³ per standard m³) | 0.006980 m³/m³ |
| Gas viscosity (Lee–Gonzalez–Eakin) | 0.016923 cP |
Open this example in the calculator and change any input.
Formula
\(T_{pc} = 168 + 325\gamma_g - 12.5\gamma_g^2, \quad p_{pc} = 677 + 15\gamma_g - 37.5\gamma_g^2\ (\text{°R, psia})\)
\(B_g = 0.02827\frac{ZT}{p}, \quad \mu_g = 10^{-4}K\exp\left[X\left(\frac{\rho_g}{62.4}\right)^Y\right]\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\gamma_g\) | Gas gravity (air = 1) | - |
| \(\text{type}\) | Gas type | - |
| \(p\) | Pressure (absolute) | Pa |
| \(T\) | Temperature | K |
| \(T_{pc}\) | Pseudo-critical temperature | K |
| \(p_{pc}\) | Pseudo-critical pressure | Pa |
| \(T_{pr}\) | Pseudo-reduced temperature | - |
| \(p_{pr}\) | Pseudo-reduced pressure | - |
| \(Z\) | Compressibility factor | - |
| \(\rho_g\) | Gas density | kg/m³ |
| \(B_g\) | Gas formation volume factor (reservoir m³ per standard m³) | m³/m³ |
| \(\mu_g\) | Gas viscosity (Lee–Gonzalez–Eakin) | Pa·s |
Method and standards
Standing's pseudo-critical properties (natural gas: 168 + 325γ − 12.5γ² °R, 677 + 15γ − 37.5γ² psia; condensate: 187 + 330γ − 71.5γ², 706 − 51.7γ − 11.1γ²); Hall–Yarborough Z by root search; Lee–Gonzalez–Eakin viscosity with K = (9.4 + 0.02M)T^1.5/(209 + 19M + T), X = 3.5 + 986/T + 0.01M, Y = 2.4 − 0.2X (T °R, ρ lb/ft³). Ahmed's eq. 2-19 prints 667 for the constant; his worked examples and Standing use 677.
Where it is used
- Gas in place and reserves.
- Pipeline and well calculations needing Z and viscosity.
Common mistakes
- Using it for sour gas without correction.
- Using gauge pressure.
Assumptions and limits
- Hall–Yarborough range 1.05 ≤ T_pr ≤ 3.
References
- Ahmed
- Reservoir Engineering Handbook
- 5th ed. (Gulf Professional Publishing, 2019)
- ch. 2: Standing pseudo-critical properties (eqs. 2-18 to 2-21)
- Hall–Yarborough Z
- B_g (eq. 2-53)
- Lee–Gonzalez–Eakin viscosity (eqs. 2-62 to 2-65)
Questions and answers
When should I use the condensate line?
For gases that come with liquid condensate (rich gas, gravity above about 0.75); the pseudo-critical properties differ.
What is B_g used for?
It converts surface gas volumes to reservoir volumes: gas in place, material balance and well deliverability.
What do the defaults represent?
A 0.7-gravity natural gas at 2,000 psia and 150 °F.
Method and article reviewed by FireCAD engineering on 17 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.