FireCADCalc

Oil API Gravity, Specific Gravity and Density at Reservoir Conditions

Specific gravity and stock-tank density of a crude from its API gravity, and its density at reservoir conditions from solution gas and formation volume factor.

Process steam and utilitiesRefinery and petrochemicalChemical and fertiliserTank and drum

Inputs

Examples: 35 °API, 375 scf/STBHeavy 18 °API dead oilLight 45 °API, 900 scf/STB

Results

Water at 60 °F is 999.016 kg/m³ (62.4 lb/ft³ in Ahmed's form). Light oils are above 31.1 °API, medium 22.3–31.1, heavy below 22.3 (API classes).

Oil specific gravity (60/60 °F)0.84985
Stock-tank oil density849.01kg/m³
Oil density at reservoir conditions728.59kg/m³

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 35 °API, 375 scf/STB. The inputs, in the units selected above:

InputValue
Oil gravity35.000 -
Solution gas-oil ratio375.00 scf/STB
Solution gas gravity (air = 1)0.75000 -
Oil formation volume factor1.2500 -

Applying the formula below gives:

ResultValue
Oil specific gravity (60/60 °F)0.84985
Stock-tank oil density849.01 kg/m³
Oil density at reservoir conditions728.59 kg/m³

Open this example in the calculator and change any input.

Formula

\(\gamma_o = \frac{141.5}{\text{API} + 131.5}, \quad \rho_o = \frac{62.4\gamma_o + 0.0136R_s\gamma_g}{B_o}\ (\text{lb/ft}^3,\ R_s\ \text{scf/STB})\)

Variables

Symbol Meaning SI unit
\(\text{API}\) Oil gravity -
\(R_s\) Solution gas-oil ratio m³/m³
\(\gamma_g\) Solution gas gravity (air = 1) -
\(B_o\) Oil formation volume factor -
\(\gamma_o\) Oil specific gravity (60/60 °F) -
\(\rho_{st}\) Stock-tank oil density kg/m³
\(\rho_o\) Oil density at reservoir conditions kg/m³

Method and standards

Mass balance of stock-tank oil and dissolved gas.

Where it is used

  • Crude assays and tank gauging.
  • PVT checks.

Common mistakes

  • Confusing API with specific gravity.
  • Using B_o at the wrong pressure.

Assumptions and limits

  • Black-oil model.

References

  • Ahmed
  • Reservoir Engineering Handbook
  • 5th ed. (Gulf Professional Publishing, 2019)
  • ch. 2
  • eqs. 2-67 and 2-92

Questions and answers

Why does API gravity rise as oil gets lighter?

API = 141.5/γ − 131.5 is an inverse scale; water is 10 °API.

Why is reservoir oil lighter than stock-tank oil?

Dissolved gas adds little mass but the oil swells by B_o.

What do the defaults represent?

A 35 °API crude with 375 scf/STB of 0.75-gravity gas and B_o = 1.25.

Method and article reviewed by FireCAD engineering on 17 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.