Worked example
Example: Half open, R 50, Cv 100. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Valve travel (opening) | 50.000 % |
| Inherent rangeability (equal percentage) | 50.000 - |
| Rated Cv at full travel | 100.00 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| Linear: share of rated Cv | 50.000 % |
| Equal percentage: share of rated Cv R^(x−1) | 14.142 % |
| Quick opening (square-root form): share of rated Cv | 70.711 % |
| Cv, linear | 50.000 |
| Cv, equal percentage | 14.142 |
Open this example in the calculator and change any input.
Formula
\(f_{lin} = x, \quad f_{eq} = R^{x-1}, \quad f_{qo} = \sqrt x\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(x\) | Valve travel (opening) | - |
| \(R\) | Inherent rangeability (equal percentage) | - |
| \(C_{v,max}\) | Rated Cv at full travel | - |
| \(f_{lin}\) | Linear: share of rated Cv | - |
| \(f_{eq}\) | Equal percentage: share of rated Cv R^(x−1) | - |
| \(f_{qo}\) | Quick opening (square-root form): share of rated Cv | - |
| \(C_{v,lin}\) | Cv, linear | - |
| \(C_{v,eq}\) | Cv, equal percentage | - |
Method and standards
Inherent characteristics.
Where it is used
- Valve selection and control loop gain.
- Checking a valve's position against flow.
Common mistakes
- Confusing inherent and installed curves.
- Using equal percentage at very low travel.
Assumptions and limits
The ideal equal-percentage curve gives 1/R of rated Cv at zero travel, not zero: a real valve departs from the curve below its rangeability limit and shuts off at the seat.
Constant DP across the valve.
References
- Inherent flow characteristics (IEC 60534-2-4; ISA-75.11.01)
Questions and answers
What Cv at half travel, R = 50?
Linear 50 % of Cv; equal percentage 14.1 %.
Why equal percentage?
Each step in travel changes flow by the same percentage: it compensates for falling DP in most systems.
Is the equal-percentage curve zero at closed?
No, it gives 1/R; real valves shut off below that.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.