Worked example
Example: Diethyl ether–methanol 30.2 mol %, 0 °C (Perry's: 0.160 and 0.167). The inputs, in the units selected above:
| Input | Value |
|---|---|
| Conductivity of liquid 1 | 0.13830 W/(m·K) |
| Conductivity of liquid 2 | 0.20690 W/(m·K) |
| Mole fraction of liquid 1 | 30.200 % |
| Molar mass of 1 | 74.122 kg/kmol |
| Molar mass of 2 | 32.042 kg/kmol |
| Molar density of 1 (kmol/m³) | 9.9335 - |
| Molar density of 2 (kmol/m³) | 25.371 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| Mass fraction of 1 | 50.022 % |
| Volume fraction of 1 | 52.495 % |
| Mixture conductivity, Filippov | 0.16024 W/(m·K) |
| Mixture conductivity, Li | 0.16749 W/(m·K) |
| Mass-fraction average (for comparison) | 0.17259 W/(m·K) |
Open this example in the calculator and change any input.
Formula
\(k_{Filippov} = w_1k_1 + w_2k_2 - 0.72w_1w_2|k_2 - k_1|\)
\(k_{Li} = \sum_i\sum_j\phi_i\phi_j\frac{2k_ik_j}{k_i + k_j}, \quad \phi_i = \frac{x_i/\rho_i}{\sum x_j/\rho_j}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(k_1\) | Conductivity of liquid 1 | W/(m·K) |
| \(k_2\) | Conductivity of liquid 2 | W/(m·K) |
| \(x_1\) | Mole fraction of liquid 1 | - |
| \(M_1\) | Molar mass of 1 | kg/kmol |
| \(M_2\) | Molar mass of 2 | kg/kmol |
| \(\rho_1\) | Molar density of 1 (kmol/m³) | - |
| \(\rho_2\) | Molar density of 2 (kmol/m³) | - |
| \(w_1\) | Mass fraction of 1 | - |
| \(\phi_1\) | Volume fraction of 1 | - |
| \(k_{Filippov}\) | Mixture conductivity, Filippov | W/(m·K) |
| \(k_{Li}\) | Mixture conductivity, Li | W/(m·K) |
| \(k_{linear}\) | Mass-fraction average (for comparison) | W/(m·K) |
Method and standards
Filippov and Li correlations.
Where it is used
- Solvent blends and process streams.
Common mistakes
- Using mole fractions in Filippov.
- Pure conductivities at another temperature.
Assumptions and limits
- Binary; pure values at the mixture temperature.
References
- Perry's Chemical Engineers' Handbook
- 9th ed. (McGraw-Hill, 2019)
- sec. 2
- Eqs. (2-113) (Filippov) and (2-114) (Li) with the diethyl ether–methanol example
Questions and answers
What does Perry's example give?
30.2 mol % diethyl ether in methanol at 0 °C: 0.160 W/(m·K) by Filippov, 0.167 by Li, 0.173 measured.
Why is the mixture below the linear average?
Unlike molecules pack and interact less effectively for energy transfer; both methods reflect this.
More than two components?
Li's method extends to many components with the same pairwise harmonic mean; this calculator handles two.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.