Worked example
Example: Disc 500 kg, 0.6 m radius, 1 500 to 1 450 rpm. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Flywheel | Solid disc (I = m r²/2) |
| Mass | 500.00 kg |
| Outer radius | 0.60000 m |
| Moment of inertia (when entered) | 90.000 kg·m² |
| Highest speed | 1,500.0 rpm |
| Lowest speed | 1,450.0 rpm |
Applying the formula below gives:
| Result | Value |
|---|---|
| Moment of inertia | 90.000 kg·m² |
| Kinetic energy at the highest speed | 1,110.3 kJ |
| Energy given up from highest to lowest speed | 72.788 kJ |
| Coefficient of speed fluctuation | 3.3898 % |
| Rim speed at the highest speed | 94.248 m/s |
Open this example in the calculator and change any input.
Formula
\(I = \tfrac12 m r^2\ (\text{disc}), \quad I = m r^2\ (\text{rim})\)
\(E_1 = \tfrac12 I \omega_1^2, \quad \Delta E = \tfrac12 I (\omega_1^2 - \omega_2^2)\)
\(C_s = \frac{n_1 - n_2}{(n_1 + n_2)/2}, \quad v = \omega_1 r\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\text{shape}\) | Flywheel | - |
| \(m\) | Mass | kg |
| \(r\) | Outer radius | m |
| \(I\) | Moment of inertia (when entered) | kg·m² |
| \(n_1\) | Highest speed | 1/s |
| \(n_2\) | Lowest speed | 1/s |
| \(E_1\) | Kinetic energy at the highest speed | J |
| \(\Delta E\) | Energy given up from highest to lowest speed | J |
| \(C_s\) | Coefficient of speed fluctuation | - |
| \(v\) | Rim speed at the highest speed | m/s |
| \(\omega_1, \omega_2\) | Angular speeds 2πn | rad/s |
Method and standards
Kinetic energy of a rotating body; the energy exchanged between two speeds is the difference of the two energies.
Where it is used
- Press, crusher and reciprocating compressor drives.
- Run-down time and stored energy of large fans.
- Start-up energy of high-inertia loads.
Common mistakes
- Using rpm directly instead of rad/s.
- Using the outer radius for a thick rim.
- Ignoring the hub and arms.
Assumptions and limits
- Rigid body; uniform disc or thin rim.
- The rim speed is not compared with a material limit; zero mass or radius is flagged.
References
- Rigid-body rotation
- E = I ω²/2 (classical mechanics)
Questions and answers
How much energy does a 500 kg, 0.6 m radius disc store at 1 500 rpm?
Its inertia is 90 kg·m², so 1.11 MJ; slowing to 1 450 rpm releases 72.8 kJ.
Why is a rim better than a disc?
The mass is all at the radius, so the same mass gives twice the inertia: I = m r² against m r²/2.
What limits a flywheel?
Rim speed: the hoop stress grows with its square. Check it against the material's safe speed.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.