Worked example
Example: 24/72, ring fixed, 1,500 rpm. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Sun gear teeth | 24.000 - |
| Ring gear teeth | 72.000 - |
| Member held fixed | Ring fixed (sun in, carrier out) |
| Number of planets (for the equal-spacing check) | 3.0000 - |
| Input speed | 1,500.0 rpm |
Applying the formula below gives:
| Result | Value |
|---|---|
| Planet teeth (for equal module) | 24.000 |
| Ratio input/output | 4.0000 |
| Output speed | 375.00 rpm |
| Equal spacing check for n_p planets (1 = possible) | 1.0000 |
Open this example in the calculator and change any input.
Formula
\(\frac{N_s - N_c}{N_r - N_c} = -\frac{z_r}{z_s}, \quad i_{ring\,fixed} = 1 + \frac{z_r}{z_s}, \quad z_p = \frac{z_r - z_s}{2}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(z_s\) | Sun gear teeth | - |
| \(z_r\) | Ring gear teeth | - |
| \(\text{fixed}\) | Member held fixed | - |
| \(n_p\) | Number of planets (for the equal-spacing check) | - |
| \(N_{in}\) | Input speed | 1/s |
| \(z_p\) | Planet teeth (for equal module) | - |
| \(i\) | Ratio input/output | - |
| \(N_{out}\) | Output speed | 1/s |
| \(\text{assembly}\) | Equal spacing check for n_p planets (1 = possible) | - |
Method and standards
Willis equation.
Where it is used
- Gearbox selection.
- Mill, conveyor and winch drives.
Common mistakes
- Odd ring–sun difference (no integer planet).
- Ignoring the sign of the ratio.
Assumptions and limits
- Simple planetary; equal module; whole tooth numbers.
- Equal spacing of n_p planets needs (z_s + z_r)/n_p to be whole; planet undercut (fewer than 17 teeth at 20°) is flagged. Ring–planet tip interference is not checked.
References
- Rattan
- Theory of Machines
- 4th ed. (McGraw-Hill, 2014); Bhandari
- Design of Machine Elements
- 4th ed. (McGraw-Hill, 2017) (epicyclic gear trains, tabular and Willis methods)
Questions and answers
Why are planetary gearboxes compact?
Several planets share the load, and the ring wraps around them, so high ratios fit in a small diameter.
What ratio does a ring-fixed set give?
1 + z_r/z_s, typically 3 to 10 per stage.
What do the defaults represent?
A 24-tooth sun and 72-tooth ring with the ring fixed, input at 1,500 rpm.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.