FireCADCalc

Gear Train Ratio, Output Speed and Torque

Overall ratio of a gearbox with up to three reduction stages, the output speed, input and output torque and output power with the efficiency per stage.

PumpFan and blower

Inputs

Examples: Two stages 4 x 3.5, 15 kW at 1 450 rpm, 98 % per stageThree stages 5 x 4 x 3, 7.5 kW at 1 440 rpm, 97 %Single stage 2.5, 30 kW at 2 950 rpm, 99 %

Results

Overall ratio14.000
Output speed103.57rpm
Input torque98.786N·m
Output torque1,328.2N·m
Output power14.406kW
Overall efficiency96.040%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Two stages 4 x 3.5, 15 kW at 1 450 rpm, 98 % per stage. The inputs, in the units selected above:

InputValue
Input speed1,450.0 rpm
Input power15.000 kW
Number of stages2
Ratio of stage 1 (driven teeth ÷ driving teeth)4.0000 -
Ratio of stage 23.5000 -
Ratio of stage 31.0000 -
Efficiency per stage98.000 %

Applying the formula below gives:

ResultValue
Overall ratio14.000
Output speed103.57 rpm
Input torque98.786 N·m
Output torque1,328.2 N·m
Output power14.406 kW
Overall efficiency96.040 %

Open this example in the calculator and change any input.

Formula

\(i = \prod_{k=1}^{N} i_k\ \ (\text{only the first } N \text{ stages are used})\)

\(n_2 = n_1 / i, \quad \eta = \eta_s^N\)

\(T_1 = \frac{P_1}{2\pi n_1}, \quad T_2 = \frac{P_1 \eta}{2\pi n_2}, \quad P_2 = P_1 \eta\)

Variables

Symbol Meaning SI unit
\(n_1\) input speed rev/s
\(P_1\) input power W
\(N\) number of stages -
\(i_1\) ratio of stage 1 -
\(i_2\) ratio of stage 2 -
\(i_3\) ratio of stage 3 -
\(\eta_s\) efficiency per stage -
\(i\) overall ratio -
\(n_2\) output speed rev/s
\(T_1\) input torque N·m
\(T_2\) output torque N·m
\(P_2\) output power W
\(\eta\) overall efficiency -

Method and standards

Stage ratios multiply; the overall efficiency is the stage efficiency raised to the number of stages. Output torque follows from output power over output angular speed.

Where it is used

  • Selecting a gearbox for a conveyor or agitator.
  • Checking output torque against the driven machine.
  • Estimating gearbox losses.

Common mistakes

  • Mixing up step-up and reduction ratios.
  • Ignoring service factors when selecting the gearbox.
  • Using a high stage efficiency for worm gears.

Assumptions and limits

  • Steady running; service factor and thermal rating are for the gearbox maker's selection.

References

  • Gear train kinematics

Questions and answers

What does a 4 × 3.5 two-stage gearbox give?

Ratio 14: 1 450 rpm in gives 103.6 rpm out; 15 kW in gives 1 328 N·m out with 98 % per stage.

Why does torque rise with ratio?

Power is torque times speed; cutting speed by the ratio multiplies torque by the ratio, less the gear losses.

What efficiency per stage?

Typically 97–99 % for helical and spur stages; worm gears are much lower.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.