Worked example
Example: Four 0.5 kg shoes, 1,500 rpm. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Mass of each shoe | 0.50000 kg |
| Number of shoes | 4.0000 - |
| Radius of the shoe centre of gravity | 100.00 mm |
| Drum inner radius | 125.00 mm |
| Spring force on each shoe at engagement | 300.00 N |
| Friction coefficient | 0.30000 - |
| Running speed | 1,500.0 rpm |
Applying the formula below gives:
| Result | Value |
|---|---|
| Engagement speed | 739.69 rpm |
| Centrifugal force per shoe at running speed | 1,233.7 N |
| Torque transmitted | 140.06 N·m |
| Power transmitted | 22.000 kW |
Open this example in the calculator and change any input.
Formula
\(\omega_e = \sqrt{\frac{F_s}{mr}}, \quad T = n\mu(mr\omega^2 - F_s)R\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(m\) | Mass of each shoe | kg |
| \(n\) | Number of shoes | - |
| \(r\) | Radius of the shoe centre of gravity | m |
| \(R\) | Drum inner radius | m |
| \(F_s\) | Spring force on each shoe at engagement | N |
| \(\mu\) | Friction coefficient | - |
| \(N\) | Running speed | 1/s |
| \(N_e\) | Engagement speed | 1/s |
| \(F_c\) | Centrifugal force per shoe at running speed | N |
| \(T\) | Torque transmitted | N·m |
| \(P\) | Power transmitted | W |
Method and standards
Centrifugal force balance.
Where it is used
- Small engine and motor drives.
- Soft-start couplings.
Common mistakes
- Ignoring spring preload.
- Using drum outer radius.
Assumptions and limits
- Rigid shoes; constant radius; the shoe centre of gravity inside the drum radius and a whole number of shoes.
- Below the engagement speed the torque is zero, with a note.
References
- Rattan
- Theory of Machines
- 4th ed. (McGraw-Hill, 2014); Bhandari
- Design of Machine Elements
- 4th ed. (McGraw-Hill, 2017) (centrifugal clutch)
Questions and answers
Why use a centrifugal clutch?
It lets a motor or engine start unloaded and picks up the load automatically as speed rises.
What sets the engagement speed?
The spring preload against the shoes' centrifugal force.
What do the defaults represent?
Four 0.5 kg shoes at 100 mm radius in a 125 mm drum, springs 300 N, running at 1,500 rpm.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.