Worked example
Example: Ball bearing C 33 kN, 6 + 2 kN, 1,450 rpm. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Radial load | 6.0000 kN |
| Axial load | 2.0000 kN |
| Radial factor (bearing catalogue) | 0.56000 - |
| Axial factor (bearing catalogue) | 1.6000 - |
| Basic dynamic load rating | 33.000 kN |
| Life exponent | Ball bearings (3) |
| Speed | 1,450.0 rpm |
| Load (service) factor | 1.2000 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| Equivalent dynamic load | 7.8720 kN |
| Rating life (million revolutions) | 73.669 |
| Rating life | 846.77 h |
Open this example in the calculator and change any input.
Formula
\(P = f_s\max(XF_r + YF_a,\ F_r), \quad L_{10} = \left(\frac CP\right)^p\ \text{million rev}, \quad L_{10h} = \frac{10^6L_{10}}{60N}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(F_r\) | Radial load | N |
| \(F_a\) | Axial load | N |
| \(X\) | Radial factor (bearing catalogue) | - |
| \(Y\) | Axial factor (bearing catalogue) | - |
| \(C\) | Basic dynamic load rating | N |
| \(p\) | Life exponent | - |
| \(N\) | Speed | 1/s |
| \(f_s\) | Load (service) factor | - |
| \(P\) | Equivalent dynamic load | N |
| \(L_{10}\) | Rating life (million revolutions) | - |
| \(L_{10h}\) | Rating life | s |
Method and standards
Basic rating life.
Where it is used
- Bearing selection and replacement.
- Life checks after load changes.
Common mistakes
- Using static rating C₀ for life.
- Forgetting the axial load.
Assumptions and limits
- Basic rating life; normal lubrication and cleanliness.
- There is no input for the catalogue's e: when F_a/F_r ≤ e, enter X = 1 and Y = 0 yourself. The larger of XF_r + YF_a and F_r is used as a guard.
- The roller exponent is the exact 10/3.
References
- Budynas and Nisbett
- Shigley's Mechanical Engineering Design
- 10th ed. (McGraw-Hill, 2015)
- ch. 11 (equivalent radial load P = XF_r + YF_a; L₁₀ = (C/P)^a)
Questions and answers
What does L₁₀ mean?
The life that 90 % of a large group of identical bearings will reach or exceed.
Why does a small load change matter so much?
Life goes as the cube of C/P for ball bearings: 26 % more load halves the life.
What do the defaults represent?
A deep-groove ball bearing (C = 33 kN) with 6 kN radial and 2 kN axial load at 1,450 rpm.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.