Worked example
Example: Crank–rocker 50/150/120/140 mm. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Crank (input) length | 50.000 mm |
| Coupler length | 150.00 mm |
| Rocker (output) length | 120.00 mm |
| Fixed (ground) link length | 140.00 mm |
Applying the formula below gives:
| Result | Value |
|---|---|
| Grashof margin (≤ 0 means Grashof) | -60.000 mm |
| Type (1 crank–rocker, 2 double crank, 3 double rocker, 4 non-Grashof) | 1.0000 |
| Minimum transmission angle | 36.870 ° |
| Maximum transmission angle | 88.727 ° |
Open this example in the calculator and change any input.
Formula
\(s + l \le p + q\ \text{(Grashof)}, \quad \cos\mu = \frac{b^2 + c^2 - (d \mp a)^2}{2bc}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(a\) | Crank (input) length | m |
| \(b\) | Coupler length | m |
| \(c\) | Rocker (output) length | m |
| \(d\) | Fixed (ground) link length | m |
| \(s + l - p - q\) | Grashof margin (≤ 0 means Grashof) | m |
| \(\text{type}\) | Type (1 crank–rocker, 2 double crank, 3 double rocker, 4 non-Grashof) | - |
| \(\mu_{min}\) | Minimum transmission angle | rad |
| \(\mu_{max}\) | Maximum transmission angle | rad |
Method and standards
Grashof's law and transmission angle extremes.
Where it is used
- Linkage design for packaging and machine tools.
- Checking existing mechanisms.
Common mistakes
- Mislabelling the ground link.
- Ignoring the transmission angle.
Assumptions and limits
- Planar pin-jointed four-bar.
- Type codes: 1 crank–rocker, 2 double crank, 3 double rocker, 4 non-Grashof. A change-point linkage (s + l = p + q) is flagged.
- The transmission angle extremes are shown only when link a turns fully (Grashof, with a or the ground link shortest).
References
- Rattan
- Theory of Machines
- 4th ed. (McGraw-Hill, 2014); Bhandari
- Design of Machine Elements
- 4th ed. (McGraw-Hill, 2017) (Grashof's law; transmission angle)
Questions and answers
What is Grashof's law?
If the shortest plus longest link is no more than the sum of the other two, at least one link can rotate fully.
Why care about transmission angle?
Near 0° or 180° the coupler pushes almost along the output link and little torque is transmitted; the mechanism can jam.
What do the defaults represent?
A crank–rocker with 50, 150, 120 and 140 mm links.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.