FireCADCalc

Cam Follower Motion: Simple Harmonic Rise

Peak velocity and acceleration of a cam follower with simple harmonic motion over a rise, from the lift, cam angle of the rise and cam speed.

Inputs

Examples: 25 mm lift over 120° at 300 rpm, 1.5 kg10 mm over 90° at 1 000 rpm, 0.4 kg40 mm over 150° at 120 rpm, 5 kg

Results

Acceleration in m/s². Simple harmonic motion jumps in acceleration at the ends of the rise; cycloidal profiles avoid that at high speed.

Peak velocity π h ω/(2β)0.58905m/s
Peak acceleration π² h ω²/(2β²)27.758m/s²
Inertia force m a_max0.041637kN
Time for the rise0.066667s

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 25 mm lift over 120° at 300 rpm, 1.5 kg. The inputs, in the units selected above:

InputValue
Lift (rise)25.000 mm
Cam angle for the rise120.00 °
Cam speed300.00 rpm
Mass of the follower train (for the force)1.5000 kg

Applying the formula below gives:

ResultValue
Peak velocity π h ω/(2β)0.58905 m/s
Peak acceleration π² h ω²/(2β²)27.758 m/s²
Inertia force m a_max0.041637 kN
Time for the rise0.066667 s

Open this example in the calculator and change any input.

Formula

\(y = \frac{h}{2}\left(1 - \cos\frac{\pi\theta}{\beta}\right), \quad v_{max} = \frac{\pi h \omega}{2\beta}, \quad a_{max} = \frac{\pi^2 h \omega^2}{2\beta^2}\)

Variables

Symbol Meaning SI unit
\(h\) Lift (rise) m
\(\beta\) Cam angle for the rise rad
\(N\) Cam speed 1/s
\(m\) Mass of the follower train (for the force) kg
\(v_{max}\) Peak velocity π h ω/(2β) m/s
\(a_{max}\) Peak acceleration π² h ω²/(2β²), in m/s² m/s²
\(F\) Inertia force m a_max N
\(t\) Time for the rise s

Method and standards

Derivatives of the SHM profile.

Where it is used

  • Cam and valve gear design.
  • Theory of machines examinations.

Common mistakes

  • Degrees for β.
  • rpm for ω.

Assumptions and limits

  • Rigid follower train.
  • F is the inertia force alone; the return spring must also carry its preload and any external load on the follower.
  • The peak acceleration is always in m/s², whatever the unit system.

References

  • Simple harmonic follower motion y = (h/2)(1 − cos(πθ/β)) (textbook theory of machines)

Questions and answers

25 mm lift over 120° at 300 rpm?

Peak velocity 0.59 m/s, acceleration 28 m/s².

Why does acceleration matter?

It sets the return spring force needed to keep the follower on the cam.

How to lower it?

A longer rise angle: acceleration falls with its square.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.