FireCADCalc

Shoe (Block) Brake: Braking Torque and Lever Force

Braking torque of a single short-shoe block brake on a drum and the lever force needed, for the drum turning either way, with the self-energising effect.

Thermal power plantProcess steam and utilitiesSugar mill and cogenerationChemical and fertiliserPulp and paperFood, dairy and textile

Inputs

Examples: 300 N·m, 300 mm drum, 600 mm leverSelf-locking geometry

Results

Short shoe: pressure taken as uniform. For long shoes (contact angle over about 60°), use the equivalent friction coefficient μ' = 4μ sin(θ/2)/(θ + sin θ).

Normal force on the shoe2,500.0N
Lever force, b + μc case (friction moment opposing the applied force when c > 0)650.00N
Lever force, b − μc case (friction moment assisting when c > 0)-150.00N
Self-locking in one direction of rotation (1 = yes)1.0000

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 300 N·m, 300 mm drum, 600 mm lever. The inputs, in the units selected above:

InputValue
Required braking torque300.00 N·m
Drum radius150.00 mm
Friction coefficient0.35000 -
Lever length (pivot to applied force)600.00 mm
Pivot to shoe centre (along the lever)200.00 mm
Offset of the friction line from the pivot40.000 mm

Applying the formula below gives:

ResultValue
Normal force on the shoe5,714.3 N
Lever force, b + μc case (friction moment opposing the applied force when c > 0)2,038.1 N
Lever force, b − μc case (friction moment assisting when c > 0)1,771.4 N
Self-locking in one direction of rotation (1 = yes)0

Open this example in the calculator and change any input.

Formula

\(R_N = \frac{T}{\mu r}, \quad P = \frac{R_N(b \pm \mu c)}{a}\)

Variables

Symbol Meaning SI unit
\(T\) Required braking torque N·m
\(r\) Drum radius m
\(\mu\) Friction coefficient -
\(a\) Lever length (pivot to applied force) m
\(b\) Pivot to shoe centre (along the lever) m
\(c\) Offset of the friction line from the pivot m
\(R_N\) Normal force on the shoe N
\(P_1\) Lever force, friction moment opposing the applied force N
\(P_2\) Lever force, friction moment assisting N
\(\text{self-locking}\) Self-locking in the assisting direction (1 = yes) -

Method and standards

Lever statics with shoe friction.

Where it is used

  • Crane, hoist and conveyor brakes.
  • Teaching.

Common mistakes

  • Wrong sign for the friction moment.
  • Applying short-shoe theory to long shoes.

Assumptions and limits

  • Short shoe; uniform pressure. The long-shoe equivalent friction μ' = 4μ sin(θ/2)/(θ + sin θ) is mentioned in the note but not applied (there is no contact-angle input): enter μ' as μ for a long shoe.
  • With a negative offset c the roles of P₁ and P₂ swap: P₁ then has the assisting friction moment. Self-locking is flagged when either lever force is zero or negative.

References

  • Rattan
  • Theory of Machines
  • 4th ed. (McGraw-Hill, 2014); Bhandari
  • Design of Machine Elements
  • 4th ed. (McGraw-Hill, 2017) (single block brake)
  • Budynas and Nisbett
  • Shigley's Mechanical Engineering Design
  • 10th ed. (McGraw-Hill, 2015)
  • ch. 16

Questions and answers

Why does direction matter?

Friction on the shoe creates a moment about the lever pivot that either helps or fights the applied force, depending on drum rotation.

What is self-locking?

When friction alone applies the brake; useful for holding but dangerous if unintended.

What do the defaults represent?

A 300 N·m brake on a 300 mm drum with a 600 mm lever.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.