Worked example
Example: 300 N·m, 300 mm drum, 600 mm lever. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Required braking torque | 300.00 N·m |
| Drum radius | 150.00 mm |
| Friction coefficient | 0.35000 - |
| Lever length (pivot to applied force) | 600.00 mm |
| Pivot to shoe centre (along the lever) | 200.00 mm |
| Offset of the friction line from the pivot | 40.000 mm |
Applying the formula below gives:
| Result | Value |
|---|---|
| Normal force on the shoe | 5,714.3 N |
| Lever force, b + μc case (friction moment opposing the applied force when c > 0) | 2,038.1 N |
| Lever force, b − μc case (friction moment assisting when c > 0) | 1,771.4 N |
| Self-locking in one direction of rotation (1 = yes) | 0 |
Open this example in the calculator and change any input.
Formula
\(R_N = \frac{T}{\mu r}, \quad P = \frac{R_N(b \pm \mu c)}{a}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(T\) | Required braking torque | N·m |
| \(r\) | Drum radius | m |
| \(\mu\) | Friction coefficient | - |
| \(a\) | Lever length (pivot to applied force) | m |
| \(b\) | Pivot to shoe centre (along the lever) | m |
| \(c\) | Offset of the friction line from the pivot | m |
| \(R_N\) | Normal force on the shoe | N |
| \(P_1\) | Lever force, friction moment opposing the applied force | N |
| \(P_2\) | Lever force, friction moment assisting | N |
| \(\text{self-locking}\) | Self-locking in the assisting direction (1 = yes) | - |
Method and standards
Lever statics with shoe friction.
Where it is used
- Crane, hoist and conveyor brakes.
- Teaching.
Common mistakes
- Wrong sign for the friction moment.
- Applying short-shoe theory to long shoes.
Assumptions and limits
- Short shoe; uniform pressure. The long-shoe equivalent friction μ' = 4μ sin(θ/2)/(θ + sin θ) is mentioned in the note but not applied (there is no contact-angle input): enter μ' as μ for a long shoe.
- With a negative offset c the roles of P₁ and P₂ swap: P₁ then has the assisting friction moment. Self-locking is flagged when either lever force is zero or negative.
References
- Rattan
- Theory of Machines
- 4th ed. (McGraw-Hill, 2014); Bhandari
- Design of Machine Elements
- 4th ed. (McGraw-Hill, 2017) (single block brake)
- Budynas and Nisbett
- Shigley's Mechanical Engineering Design
- 10th ed. (McGraw-Hill, 2015)
- ch. 16
Questions and answers
Why does direction matter?
Friction on the shoe creates a moment about the lever pivot that either helps or fights the applied force, depending on drum rotation.
What is self-locking?
When friction alone applies the brake; useful for holding but dangerous if unintended.
What do the defaults represent?
A 300 N·m brake on a 300 mm drum with a 600 mm lever.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.