FireCADCalc

Epicyclic (Planetary) Gear Train Ratio

Speed ratio of a simple planetary gear set (sun, planets, ring, carrier) for any member held fixed, from the tooth numbers (Willis equation), with the planet speed.

Thermal power plantProcess steam and utilitiesSugar mill and cogenerationChemical and fertiliserPulp and paperFood, dairy and textile

Inputs

Examples: 24/72, ring fixed, 1,500 rpm30/90, carrier fixed20/80, sun fixed

Results

Willis: (N_s − N_c)/(N_r − N_c) = −z_r/z_s. A negative ratio means the output turns the other way. Equal spacing of n planets needs (z_s + z_r)/n to be a whole number.

Planet teeth (for equal module)30.000
Ratio input/output1.2500
Output speed960.00rpm
Equal spacing check for n_p planets (1 = possible)0

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 24/72, ring fixed, 1,500 rpm. The inputs, in the units selected above:

InputValue
Sun gear teeth24.000 -
Ring gear teeth72.000 -
Member held fixedRing fixed (sun in, carrier out)
Number of planets (for the equal-spacing check)3.0000 -
Input speed1,500.0 rpm

Applying the formula below gives:

ResultValue
Planet teeth (for equal module)24.000
Ratio input/output4.0000
Output speed375.00 rpm
Equal spacing check for n_p planets (1 = possible)1.0000

Open this example in the calculator and change any input.

Formula

\(\frac{N_s - N_c}{N_r - N_c} = -\frac{z_r}{z_s}, \quad i_{ring\,fixed} = 1 + \frac{z_r}{z_s}, \quad z_p = \frac{z_r - z_s}{2}\)

Variables

Symbol Meaning SI unit
\(z_s\) Sun gear teeth -
\(z_r\) Ring gear teeth -
\(\text{fixed}\) Member held fixed -
\(n_p\) Number of planets (for the equal-spacing check) -
\(N_{in}\) Input speed 1/s
\(z_p\) Planet teeth (for equal module) -
\(i\) Ratio input/output -
\(N_{out}\) Output speed 1/s
\(\text{assembly}\) Equal spacing check for n_p planets (1 = possible) -

Method and standards

Willis equation.

Where it is used

  • Gearbox selection.
  • Mill, conveyor and winch drives.

Common mistakes

  • Odd ring–sun difference (no integer planet).
  • Ignoring the sign of the ratio.

Assumptions and limits

  • Simple planetary; equal module; whole tooth numbers.
  • Equal spacing of n_p planets needs (z_s + z_r)/n_p to be whole; planet undercut (fewer than 17 teeth at 20°) is flagged. Ring–planet tip interference is not checked.

References

  • Rattan
  • Theory of Machines
  • 4th ed. (McGraw-Hill, 2014); Bhandari
  • Design of Machine Elements
  • 4th ed. (McGraw-Hill, 2017) (epicyclic gear trains, tabular and Willis methods)

Questions and answers

Why are planetary gearboxes compact?

Several planets share the load, and the ring wraps around them, so high ratios fit in a small diameter.

What ratio does a ring-fixed set give?

1 + z_r/z_s, typically 3 to 10 per stage.

What do the defaults represent?

A 24-tooth sun and 72-tooth ring with the ring fixed, input at 1,500 rpm.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.