FireCADCalc

Centrifugal Clutch: Engagement Speed and Torque

Speed at which a centrifugal clutch engages from shoe mass, spring force and radius, and the torque it transmits at a running speed.

Thermal power plantProcess steam and utilitiesSugar mill and cogenerationChemical and fertiliserPulp and paperFood, dairy and textile

Inputs

Examples: Four 0.5 kg shoes, 1,500 rpmTwo 1 kg shoes, 1,000 rpm

Results

Shoe radius taken as constant from engagement to running. Torque rises with the square of speed above engagement.

Engagement speed739.69rpm
Centrifugal force per shoe at running speed1,233.7N
Torque transmitted140.06N·m
Power transmitted22.000kW

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Four 0.5 kg shoes, 1,500 rpm. The inputs, in the units selected above:

InputValue
Mass of each shoe0.50000 kg
Number of shoes4.0000 -
Radius of the shoe centre of gravity100.00 mm
Drum inner radius125.00 mm
Spring force on each shoe at engagement300.00 N
Friction coefficient0.30000 -
Running speed1,500.0 rpm

Applying the formula below gives:

ResultValue
Engagement speed739.69 rpm
Centrifugal force per shoe at running speed1,233.7 N
Torque transmitted140.06 N·m
Power transmitted22.000 kW

Open this example in the calculator and change any input.

Formula

\(\omega_e = \sqrt{\frac{F_s}{mr}}, \quad T = n\mu(mr\omega^2 - F_s)R\)

Variables

Symbol Meaning SI unit
\(m\) Mass of each shoe kg
\(n\) Number of shoes -
\(r\) Radius of the shoe centre of gravity m
\(R\) Drum inner radius m
\(F_s\) Spring force on each shoe at engagement N
\(\mu\) Friction coefficient -
\(N\) Running speed 1/s
\(N_e\) Engagement speed 1/s
\(F_c\) Centrifugal force per shoe at running speed N
\(T\) Torque transmitted N·m
\(P\) Power transmitted W

Method and standards

Centrifugal force balance.

Where it is used

  • Small engine and motor drives.
  • Soft-start couplings.

Common mistakes

  • Ignoring spring preload.
  • Using drum outer radius.

Assumptions and limits

  • Rigid shoes; constant radius; the shoe centre of gravity inside the drum radius and a whole number of shoes.
  • Below the engagement speed the torque is zero, with a note.

References

  • Rattan
  • Theory of Machines
  • 4th ed. (McGraw-Hill, 2014); Bhandari
  • Design of Machine Elements
  • 4th ed. (McGraw-Hill, 2017) (centrifugal clutch)

Questions and answers

Why use a centrifugal clutch?

It lets a motor or engine start unloaded and picks up the load automatically as speed rises.

What sets the engagement speed?

The spring preload against the shoes' centrifugal force.

What do the defaults represent?

Four 0.5 kg shoes at 100 mm radius in a 125 mm drum, springs 300 N, running at 1,500 rpm.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.