Worked example
Example: Steam stripper S = 1.5. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Solute in the liquid entering (mole fraction) | 0.10000 % |
| Solute in the liquid leaving | 0.001000 % |
| Solute in the stripping gas entering | 0 % |
| Equilibrium slope y = mx | 30.000 - |
| Stripping gas to liquid molar ratio | 0.050000 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| Stripping factor mV/L | 1.5000 |
| Theoretical stages | 8.6971 |
| Fraction stripped | 99.000 % |
Open this example in the calculator and change any input.
Formula
\(\frac{x_{in} - x_{out}}{x_{in} - y_{in}/m} = \frac{S^{N+1} - S}{S^{N+1} - 1}, \quad S = \frac{mV}{L}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(x_{in}\) | Solute in the liquid entering (mole fraction) | - |
| \(x_{out}\) | Solute in the liquid leaving | - |
| \(y_{in}\) | Solute in the stripping gas entering | - |
| \(m\) | Equilibrium slope y = mx | - |
| \(V/L\) | Stripping gas to liquid molar ratio | - |
| \(S\) | Stripping factor mV/L | - |
| \(N\) | Theoretical stages | - |
| \(\phi_S\) | Fraction stripped | - |
Method and standards
Kremser stripping form solved for N.
Where it is used
- Sour water and volatile organic stripping.
- Deaerators and CO₂ strippers.
Common mistakes
- Using the absorption factor.
- Ignoring solute in the gas.
Assumptions and limits
- Dilute; straight equilibrium; isothermal.
References
- Perry's Chemical Engineers' Handbook
- 9th ed. (McGraw-Hill, 2019)
- sec. 13 (distillation)
- Kremser equation for strippers
Questions and answers
What stripping factor is needed?
S above 1; around 1.4–2 gives a reasonable number of stages.
Why does the inlet gas matter?
Solute in the stripping gas sets a floor x = y_in/m below which the liquid cannot be stripped.
Is this the absorber equation turned round?
Yes, with A replaced by S = mV/L and liquid and gas swapped.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.