Worked example
Example: 12 blowers, 1.5 kg/s for 90 s, 3 cycles a day, 45 bar(a) / 400 °C. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Number of soot blowers | 12.000 - |
| Steam flow of one blower while blowing | 5,400.0 kg/h |
| Blowing time of one blower per cycle | 90.000 s |
| Cycles per day | 3.0000 - |
| Steam pressure at the blowers (absolute) | 45.000 bar |
| Steam condition | Superheated at the temperature below |
| Steam temperature (superheated only) | 400.00 °C |
| Feedwater temperature | 140.00 °C |
| Boiler (feedwater) pressure (absolute) | 45.000 bar |
| Boiler efficiency (on GCV) | 80.000 % |
| Gross calorific value of the fuel, as fired | 18,600 kJ/kg |
| Fuel price per tonne (your currency) | 6,000.0 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| Steam used per day | 4.8600 t |
| Fuel to raise it, per day | 0.85366 t |
| Fuel cost per day (your currency) | 5,121.9 |
| Heat in the steam per day | 12.702 GJ |
Open this example in the calculator and change any input.
Formula
\(m_s = n\,\dot m_b\,t_b\,N_c \qquad Q_d = m_s\,(h_s - h_{fw}) \qquad m_f = \frac{Q_d}{\eta_1\,GCV} \qquad C_d = m_f\,c_f\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(n\) | number of soot blowers | – |
| \(\dot m_b\) | steam flow of one blower while blowing | kg/s |
| \(t_b\) | blowing time of one blower per cycle | s |
| \(N_c\) | cycles per day | – |
| \(p\) | steam pressure at the blowers, absolute | Pa |
| \(\text{state}\) | saturated or superheated steam | – |
| \(T_s\) | steam temperature (superheated) | K |
| \(T_{fw}\) | feedwater temperature | K |
| \(p_{fw}\) | boiler (feedwater) pressure, absolute | Pa |
| \(\eta_1\) | boiler efficiency on GCV | – |
| \(GCV\) | gross calorific value | J/kg |
| \(c_f\) | fuel price per tonne, your currency | – |
| \(m_s\) | steam used per day | kg |
| \(m_f\) | fuel to raise it, per day | kg |
| \(C_d\) | fuel cost per day, your currency | – |
| \(Q_d\) | heat in the steam per day | J |
| \(h_s\) | steam enthalpy | J/kg |
| \(h_{fw}\) | feedwater enthalpy | J/kg |
Method and standards
Daily steam from the blower data; heat to raise it from feedwater with FireCAD's IAPWS-IF97 enthalpies; fuel from the boiler efficiency on GCV. The cost uses the fuel price per tonne you enter (mass in tonnes).
Where it is used
- Optimising soot blowing frequency in coal, biomass and bagasse boilers.
- Comparing steam soot blowing with acoustic or air blowing.
- Including soot blowing in the make-up water and steam balance.
Common mistakes
- Using the maker's flow at a different blowing pressure.
- Forgetting that soot blowing steam is lost: it needs make-up water and treatment too.
- Blowing every surface on a fixed schedule whatever its fouling.
Assumptions and limits
- Steam taken from the boiler's own output; the cost covers fuel only, not water, treatment or wear.
- The steam enthalpy is taken at the blower pressure and temperature (a reducing valve keeps it unchanged); the feedwater enthalpy at the boiler pressure.
References
- IAPWS R7-97(2012) IF97
- first law heat balance
Questions and answers
How much steam does soot blowing use?
12 blowers at 1.5 kg/s each for 90 s, three cycles a day, use 4.86 t of steam a day. At 45 bar(a) and 400 °C from 140 °C feedwater, raising it takes 12.7 GJ, 854 kg of coal at 80 % efficiency; at 6000 per tonne of coal that is about 5120 a day.
Is soot blowing worth its steam?
Usually, when the gas temperature rise it prevents is large: every 20 K of exit gas temperature is about 1 % of fuel. Compare the daily steam cost with the fuel saving from the flue gas temperature saving calculator, and blow on need (gas temperature or pressure drop) rather than by the clock.
Where do I get the blower's steam flow?
From the soot blower maker's data sheet; it depends on the nozzle and the blowing pressure. Long retractable blowers use much more than wall blowers.
Method and article reviewed by FireCAD engineering on 10 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.