FireCADCalc

Boiler Efficiency: Gross (GCV) and Net (NCV) Basis

Converts boiler efficiency from the gross (higher) to the net (lower) calorific value basis, and gives the difference in percentage points.

Thermal power plantProcess steam and utilitiesSugar mill and cogenerationDistillery and ethanolBoiler

Inputs

Examples: Bagasse 70 % on GCVCoal

Results

Efficiency on NCV90.811%
Difference (net − gross)20.811%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Bagasse 70 % on GCV. The inputs, in the units selected above:

InputValue
Efficiency on GCV70.000 %
Fuel gross calorific value9,600.0 kJ/kg
Fuel net calorific value7,400.0 kJ/kg

Applying the formula below gives:

ResultValue
Efficiency on NCV90.811 %
Difference (net − gross)20.811 %

Open this example in the calculator and change any input.

Formula

\(\eta_{NCV} = \eta_{GCV} \frac{GCV}{NCV}\)

Variables

Symbol Meaning SI unit
\(\eta_{GCV}\) Efficiency on GCV -
\(GCV\) Fuel gross calorific value J/kg
\(NCV\) Fuel net calorific value J/kg
\(\eta_{NCV}\) Efficiency on NCV -
\(\Delta\eta\) Difference (net − gross) -

Method and standards

Definitions.

Where it is used

  • Comparing quotations.
  • Reports to different standards.

Common mistakes

  • Comparing gross with net.

Assumptions and limits

  • Same fuel, with GCV and NCV on the same basis (as fired). The NCV of a wet fuel depends strongly on its moisture, so both values must be for the fuel as it is fired.
  • For the reverse conversion use \(\eta_{GCV} = \eta_{NCV}\,NCV/GCV\).

References

  • Same useful heat on two bases: η_NCV = η_GCV × GCV/NCV

Questions and answers

Why do bagasse boilers quote higher net efficiencies?

Wet bagasse has a large gap between GCV and NCV.

Which basis for guarantees?

State it: India and the US mostly use GCV, Europe NCV.

Comparing two boilers?

Only on the same basis and the same fuel.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.