FireCADCalc

Relative Volatility from an Equilibrium Point

Relative volatility from one equilibrium x–y pair, and the vapour composition at another liquid composition for that constant α.

Distillery and ethanolRefinery and petrochemicalChemical and fertiliser

Inputs

Examples: x 0.3, y 0.55Benzene–toluene-like

Results

Relative volatility2.4483
Vapour at x′ for constant α37.968%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: x 0.3, y 0.55. The inputs, in the units selected above:

InputValue
Liquid mole fraction (light)30.000 %
Vapour mole fraction in equilibrium55.000 %
Another liquid composition60.000 %

Applying the formula below gives:

ResultValue
Relative volatility2.8519
Vapour at x′ for constant α81.053 %

Open this example in the calculator and change any input.

Formula

\(\alpha = \frac{y(1 - x)}{x(1 - y)}, \quad y' = \frac{\alpha x'}{1 + (\alpha - 1)x'}\)

Variables

Symbol Meaning SI unit
\(x\) Liquid mole fraction (light) -
\(y\) Vapour mole fraction in equilibrium -
\(x'\) Another liquid composition -
\(\alpha\) Relative volatility -
\(y'\) Vapour at x′ for constant α -

Method and standards

Definition of relative volatility for a binary.

Where it is used

  • Reducing plant or laboratory data.

Common mistakes

  • Mixing mass and mole fractions.

Assumptions and limits

  • Binary; constant α between the points.
  • α below 1 means the component entered as light is the heavier; the page flags it.

References

  • Perry's Chemical Engineers' Handbook
  • 9th ed. (McGraw-Hill, 2019)
  • sec. 13 (distillation)
  • relative volatility definition
  • Eq. (13-33)

Questions and answers

Is α constant?

Nearly so for similar molecules (benzene–toluene); far from it for ethanol–water.

What if α < 1?

The component labelled light is in fact the heavier: swap them.

How many points do I need?

One for constant α; check others to confirm it is constant.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.