Worked example
Example: 100 kmol 50 % to 20 %, α 2.5. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Charge | 100.00 kmol |
| Initial mole fraction (light) | 50.000 % |
| Final mole fraction in the still | 20.000 % |
| Relative volatility | 2.5000 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| Left in the still | 24.803 kmol |
| Distillate collected | 75.197 kmol |
| Average distillate mole fraction | 59.895 % |
| Light component recovered | 90.079 % |
Open this example in the calculator and change any input.
Formula
\(\ln\frac{H_i}{H_f} = \frac{1}{\alpha - 1}\left[\ln\frac{x_i}{x_f} + \alpha\ln\frac{1 - x_f}{1 - x_i}\right], \quad \bar x_D = \frac{H_ix_i - H_fx_f}{H_i - H_f}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(H_i\) | Charge | mol |
| \(x_i\) | Initial mole fraction (light) | - |
| \(x_f\) | Final mole fraction in the still | - |
| \(\alpha\) | Relative volatility | - |
| \(H_f\) | Left in the still | mol |
| \(D\) | Distillate collected | mol |
| \(\bar x_D\) | Average distillate mole fraction | - |
| \(\eta\) | Light component recovered | - |
Method and standards
Rayleigh equation integrated for constant α.
Where it is used
- Batch stills and solvent recovery.
- Laboratory distillation.
Common mistakes
- Treating the first-drop composition as the average.
Assumptions and limits
- Constant α; no reflux; one stage.
- The distillate composition and recovery do not depend on the charge size; with a zero charge the amounts are zero.
References
- Perry's Chemical Engineers' Handbook
- 9th ed. (McGraw-Hill, 2019)
- sec. 13 (distillation)
- Eqs. (13-124) to (13-126)
Questions and answers
What does the still achieve?
One equilibrium stage: the distillate is richer, but not pure.
Why constant α?
It gives the closed-form integral; for ethanol–water use the pot still calculator with real VLE.
Is the composition average or instantaneous?
Average over the whole collected distillate.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.