FireCADCalc

Tray Column Overall Efficiency (O'Connell)

Overall tray efficiency of a distillation column from liquid viscosity and relative volatility (O'Connell), and the actual trays for the theoretical stages.

Distillery and ethanolRefinery and petrochemicalChemical and fertiliserPulp and paperFood, dairy and textile

Inputs

Examples: 0.3 mPa·s, α 2.5, 20 stagesViscous 1.5 mPa·s, α 4

Results

O'Connell's correlation is based on bubble-cap and sieve trays in commercial columns; it is a first estimate (±10–20 %). Viscosity in mPa·s in the correlation.

Overall efficiency31.719%
Actual trays38.000

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 0.3 mPa·s, α 2.5, 20 stages. The inputs, in the units selected above:

InputValue
Liquid viscosity at average column conditions0.30000 cP
Relative volatility of the key components2.5000 -
Theoretical stages (excluding reboiler)20.000 -

Applying the formula below gives:

ResultValue
Overall efficiency52.793 %
Actual trays38.000

Open this example in the calculator and change any input.

Formula

\(E_o = 0.492(\mu_L\alpha)^{-0.245}\ (\mu_L\ \mathrm{mPa\,s}), \quad N_a = \frac{N_t}{E_o}\)

Variables

Symbol Meaning SI unit
\(\mu_L\) Liquid viscosity at average column conditions Pa·s
\(\alpha\) Relative volatility of the key components -
\(N_t\) Theoretical stages (excluding reboiler) -
\(E_o\) Overall efficiency -
\(N_a\) Actual trays -

Method and standards

O'Connell correlation.

Where it is used

  • Preliminary column design.
  • Checking an existing column's tray count.

Common mistakes

  • Using feed viscosity at ambient temperature.
  • Including the reboiler as a tray.

Assumptions and limits

  • Commercial bubble-cap and sieve trays.
  • An empirical fit to plant data: far from the μα of those columns the result is an extrapolation. Below μα of about 0.055 mPa·s the formula exceeds 100 %; the page caps it and says so.

References

  • Perry's Chemical Engineers' Handbook
  • 9th ed. (McGraw-Hill, 2019)
  • sec. 14 (O'Connell correlation, E_o = 0.492(μα)^−0.245)

Questions and answers

Why does viscosity lower efficiency?

Viscous liquids slow mass transfer in the froth; heavy hydrocarbons and glycols give 30–50 %.

Why does high volatility lower it too?

With large α the vapour composition changes a lot per tray, and the trays cannot reach equilibrium as easily.

What do the defaults represent?

A light hydrocarbon or alcohol separation with 20 theoretical stages.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.