FireCADCalc

Fenske Distribution of a Non-Key Component

Split of any component between distillate and bottoms at total reflux from Fenske minimum stages and the heavy-key split, Perry's Eq. (13-31).

Refinery and petrochemicalChemical and fertiliser

Inputs

Examples: Light non-key α 3, Nmin 8Heavy non-key α 0.5

Results

Component split distillate/bottoms1.9531e-04
In the distillate9.7637e-04kmol/h
In the bottoms4.9990kmol/h
Recovered in the distillate0.019527%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Light non-key α 3, Nmin 8. The inputs, in the units selected above:

InputValue
Minimum stages8.0000 -
Volatility of the component relative to the heavy key3.0000 -
Heavy-key split distillate/bottoms0.050000 -
Component in the feed10.000 kmol/h

Applying the formula below gives:

ResultValue
Component split distillate/bottoms328.05
In the distillate9.9696 kmol/h
In the bottoms0.030391 kmol/h
Recovered in the distillate99.696 %

Open this example in the calculator and change any input.

Formula

\(\left(\frac{d}{b}\right)_i = \alpha_i^{N_{min}}\left(\frac{d}{b}\right)_{HK}, \quad d_i = f_i\frac{(d/b)_i}{1 + (d/b)_i}\)

Variables

Symbol Meaning SI unit
\(N_{min}\) Minimum stages -
\(\alpha_i\) Volatility of the component relative to the heavy key -
\((d/b)_{HK}\) Heavy-key split distillate/bottoms -
\(f_i\) Component in the feed mol/s
\((d/b)_i\) Component split distillate/bottoms -
\(d_i\) In the distillate mol/s
\(b_i\) In the bottoms mol/s
\(d_i/f_i\) Recovered in the distillate -

Method and standards

Perry's Eq. (13-31) with the heavy key as reference.

Where it is used

  • Multicomponent short-cut design.

Common mistakes

  • Using α relative to the light key with the heavy-key split.

Assumptions and limits

  • Constant α; total reflux distribution.

References

  • Perry's Chemical Engineers' Handbook
  • 9th ed. (McGraw-Hill, 2019)
  • sec. 13 (distillation)
  • Eq. (13-31)

Questions and answers

Why at total reflux?

Fenske's equation is exact only at total reflux; at finite reflux it is a good first estimate.

What α to use?

The geometric mean of top and bottom values relative to the heavy key.

How do non-keys distribute?

Lighter than the light key: almost all overhead; heavier than the heavy key: almost all in the bottoms.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.