FireCADCalc

Distillation Column Material Balance

Distillate and bottoms flows and the recoveries of light and heavy components from feed flow and the feed, distillate and bottoms compositions of a binary column.

Distillery and ethanolRefinery and petrochemicalChemical and fertiliser

Inputs

Examples: 100 kmol/h, 40 % to 95/5 %Tutorial-style 50 % to 98/2 %

Results

Distillate125.00kmol/h
Bottoms125.00kmol/h
Light component recovered in the distillate98.000%
Heavy component recovered in the bottoms98.000%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 100 kmol/h, 40 % to 95/5 %. The inputs, in the units selected above:

InputValue
Feed100.00 kmol/h
Light component in the feed (mole fraction)40.000 %
Light component in the distillate95.000 %
Light component in the bottoms5.0000 %

Applying the formula below gives:

ResultValue
Distillate38.889 kmol/h
Bottoms61.111 kmol/h
Light component recovered in the distillate92.361 %
Heavy component recovered in the bottoms96.759 %

Open this example in the calculator and change any input.

Formula

\(D = F\frac{x_F - x_B}{x_D - x_B}, \quad B = F - D, \quad \eta_L = \frac{D x_D}{F x_F}, \quad \eta_H = \frac{B(1 - x_B)}{F(1 - x_F)}\)

Variables

Symbol Meaning SI unit
\(F\) Feed mol/s
\(x_F\) Light component in the feed (mole fraction) -
\(x_D\) Light component in the distillate -
\(x_B\) Light component in the bottoms -
\(D\) Distillate mol/s
\(B\) Bottoms mol/s
\(\eta_L\) Light component recovered in the distillate -
\(\eta_H\) Heavy component recovered in the bottoms -

Method and standards

Overall and component balances.

Where it is used

  • Column specifications.
  • Plant data reconciliation.

Common mistakes

  • Mixing mass and mole fractions.
  • Specifying impossible purities.

Assumptions and limits

  • Steady state; binary or pseudo-binary.

References

  • Perry's Chemical Engineers' Handbook
  • 9th ed. (McGraw-Hill, 2019)
  • sec. 13 (distillation)
  • overall balances
  • Mass Transfer Tutorial: Distillation (McCabe–Thiele example)

Questions and answers

Why is the balance so simple?

Total and light-component balances give two equations in D and B.

Can I use mass fractions?

Yes, with mass flows; mixing bases is the usual error.

What is recovery?

The share of a component's feed that leaves in the intended product.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.