Worked example
Example: Ethanol. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Known vapour pressure | 101.33 kPa |
| Temperature of the known point | 78.250 °C |
| Heat of vaporisation (molar) | 38.560 kJ/mol |
| Temperature wanted | 50.000 °C |
| Pressure for the boiling point | 50.000 kPa |
Applying the formula below gives:
| Result | Value |
|---|---|
| Vapour pressure at T₂ | 31.963 kPa |
| Boiling point at p_t | 60.399 °C |
Open this example in the calculator and change any input.
Formula
\(\ln\frac{p_2}{p_1} = -\frac{\Delta H_v}{R}\left(\frac{1}{T_2} - \frac{1}{T_1}\right)\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(p_1\) | Known vapour pressure | Pa |
| \(T_1\) | Temperature of the known point | K |
| \(\Delta H_v\) | Heat of vaporisation (molar) | J/mol |
| \(T_2\) | Temperature wanted | K |
| \(p_t\) | Pressure for the boiling point | Pa |
| \(p_2\) | Vapour pressure at T₂ | Pa |
| \(T_b\) | Boiling point at p_t | K |
Method and standards
Clausius–Clapeyron.
Where it is used
- Vacuum distillation and evaporation.
- Solvent recovery.
Common mistakes
- Specific instead of molar ΔH.
- Long extrapolation.
Assumptions and limits
- Constant ΔH_v, ideal vapour.
References
- Clausius–Clapeyron ln(p₂/p₁) = −(ΔH_v/R)(1/T₂ − 1/T₁)
Questions and answers
Ethanol, boiling at 78.3 °C, at 50 °C?
About 32.0 kPa (measured about 29.5 kPa).
Boiling point at 50 kPa?
About 60 °C.
Better accuracy?
Use Antoine constants over the range you need.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.