FireCADCalc

Activity Coefficients by the Two-Parameter Margules Equation

Activity coefficients of both components of a binary liquid mixture and the excess Gibbs energy from the two-parameter Margules equation with your constants.

Sugar mill and cogenerationRefinery and petrochemicalChemical and fertiliser

Inputs

Examples: A12 1.5, A21 0.9, x1 0.3Negative deviationDilute in 1

Results

Activity coefficient of 11.7482
Activity coefficient of 21.1695
Excess Gibbs energy over RT0.27720

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: A12 1.5, A21 0.9, x1 0.3. The inputs, in the units selected above:

InputValue
Margules constant A₁₂ (= ln γ₁ at infinite dilution)1.5000 -
Margules constant A₂₁ (= ln γ₂ at infinite dilution)0.90000 -
Mole fraction of component 130.000 %

Applying the formula below gives:

ResultValue
Activity coefficient of 11.7482
Activity coefficient of 21.1695
Excess Gibbs energy over RT0.27720

Open this example in the calculator and change any input.

Formula

\(\ln\gamma_1 = x_2^2\left[A_{12} + 2(A_{21} - A_{12})x_1\right], \quad \ln\gamma_2 = x_1^2\left[A_{21} + 2(A_{12} - A_{21})x_2\right]\)

Variables

Symbol Meaning SI unit
\(A_{12}\) Margules constant A₁₂ (= ln γ₁ at infinite dilution) -
\(A_{21}\) Margules constant A₂₁ (= ln γ₂ at infinite dilution) -
\(x_1\) Mole fraction of component 1 -
\(\gamma_1\) Activity coefficient of 1 -
\(\gamma_2\) Activity coefficient of 2 -
\(G^E/RT\) Excess Gibbs energy over RT -

Method and standards

Margules.

Where it is used

  • Non-ideal VLE and modified Raoult's law.
  • Solvent mixtures.

Common mistakes

  • Constants for log₁₀ used as ln.
  • Extrapolating outside fitted data.

Assumptions and limits

  • Binary liquid.

References

  • Two-parameter Margules G^E/RT = x₁x₂(A₂₁x₁ + A₁₂x₂) (Smith, Van Ness and Abbott)

Questions and answers

A₁₂ 1.5, A₂₁ 0.9 at x₁ 0.3?

γ₁ about 1.75, γ₂ about 1.17.

Where do constants come from?

Fitting VLE data, or from infinite-dilution activity coefficients.

Strongly non-ideal mixtures?

Wilson or NRTL usually fit better.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.