Worked example
Example: 1 t/h coal at 150 kg/(m²·h), 4 000 kcal/kg, 2 m wide. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Fuel burnt | 1,000.0 kg/h |
| Burning rate per m² of grate | 0.041667 kg/(m²·s) |
| Calorific value of the fuel (GCV or NCV, as your grate limit is quoted) | 16,747 kJ/kg |
| Grate width | 2.0000 m |
Applying the formula below gives:
| Result | Value |
|---|---|
| Grate area | 6.6667 m² |
| Grate length for the width | 3.3333 m |
| Heat release per m² of grate | 697.80 kW/m² |
| Heat input of the fuel | 4,652.0 kW |
Open this example in the calculator and change any input.
Formula
\(A_g = \frac{\dot m_f}{r_b}, \quad L_g = \frac{A_g}{B}\)
\(q_g = r_b\, GCV, \quad \dot Q = \dot m_f\, GCV\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\dot m_f\) | Fuel burnt | kg/s |
| \(r_b\) | Burning rate per m² of grate | kg/(m²·s) |
| \(GCV\) | Calorific value of the fuel | J/kg |
| \(B\) | Grate width | m |
| \(A_g\) | Grate area | m² |
| \(L_g\) | Grate length for the width | m |
| \(q_g\) | Heat release per m² of grate | W/m² |
| \(\dot Q\) | Heat input of the fuel | W |
Method and standards
Grate area from the fuel to be burnt and the permitted burning rate.
Worked example
A boiler burns 1000 kg/h of coal of 4000 kcal/kg; the grate can burn 150 kg/(m²·h) and is 2 m wide.
- Area = 1000 / 150 = 6.67 m²; length = 6.67 / 2 = 3.33 m
- Heat release = 150 × 4000 = 600 000 kcal/(h·m²) = 698 kW/m²
Where it is used
- Boiler attendant examinations.
- Sizing or checking stoker grates.
- Converting a boiler to another fuel.
Common mistakes
- Using the steam output instead of fuel burnt.
- Using a burning rate for the wrong fuel or grate type.
- Mixing per hour and per second.
Assumptions and limits
- Burning rate entered by the user.
- Whole grate area active.
- The heat release is on the calorific basis you enter (gross or net); compare it only with limits on the same basis.
- The burning rate is not checked against typical values for the grate type; take it from the grate maker.
References
- Grate loading (textbook)
Questions and answers
What grate burns 1 t/h of coal at 150 kg/(m²·h)?
6.67 m²; on a 2 m wide grate, 3.33 m long. At 4000 kcal/kg the grate releases 698 kW/m² (600 000 kcal/(h·m²)).
Where does the burning rate come from?
The grate maker or practice for the fuel: it depends on the grate type, fuel size and air. It is your input.
And for bagasse?
Much higher rates are used on bagasse grates: 3 t/h at 400 kg/(m²·h) needs 7.5 m².
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.