FireCADCalc

Boiler Energy Balance (Losses and Efficiency)

Boiler efficiency by the heat-loss method from the individual losses and credits, with each loss in kW for the heat input: the boiler's energy balance sheet.

Thermal power plantProcess steam and utilitiesSugar mill and cogenerationPulp and paperFood, dairy and textileASME PTC 4 (fired steam generators)BoilerBoiler attendant and boiler operator examinations

Inputs

Examples: Coal boiler 80 MW inputGas-fired package boiler 12 MWBagasse boiler 150 MW

Losses, % of heat input (GCV)

Results

Boiler efficiency (on GCV)71.700%
Total losses28.600%
Heat to steam107.55MW
Total heat lost42.900MW
Heat lost in dry flue gas9.0000MW
Heat lost in water vapour (hydrogen, fuel and air moisture)28.200MW

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Coal boiler 80 MW input. The inputs, in the units selected above:

InputValue
Heat input from fuel (on GCV)80.000 MW
Dry flue gas loss5.5000 %
Loss from water formed from hydrogen4.0000 %
Loss from moisture in the fuel3.5000 %
Loss from moisture in the air0.20000 %
Loss from CO (incomplete combustion)0.20000 %
Loss from unburned carbon in ash1.2000 %
Sensible heat in ash0.30000 %
Surface radiation and convection loss1.0000 %
Unaccounted and manufacturer's margin1.0000 %
Heat credits (entering air and fuel above the reference, steam air heater, mill power)0.50000 %

Applying the formula below gives:

ResultValue
Boiler efficiency (on GCV)83.600 %
Total losses16.900 %
Heat to steam66.880 MW
Total heat lost13.520 MW
Heat lost in dry flue gas4.4000 MW
Heat lost in water vapour (hydrogen, fuel and air moisture)6.1600 MW

Open this example in the calculator and change any input.

Formula

\(\Sigma L = L_{dg} + L_{H} + L_{m} + L_{am} + L_{CO} + L_{C} + L_{ash} + L_{r} + L_{u} \qquad \eta = 1 - \Sigma L + B\)

\(\dot Q_{out} = \eta\,\dot Q_{in} \qquad \dot Q_L = \Sigma L\,\dot Q_{in} \qquad \dot Q_{dg} = L_{dg}\,\dot Q_{in} \qquad \dot Q_{w} = (L_H + L_m + L_{am})\,\dot Q_{in}\)

Variables

Symbol Meaning SI unit
\(\dot Q_{in}\) heat input from fuel, on GCV W
\(L_{dg}\) dry flue gas loss –
\(L_{H}\) loss from water formed from hydrogen –
\(L_{m}\) loss from moisture in the fuel –
\(L_{am}\) loss from moisture in the air –
\(L_{CO}\) loss from CO –
\(L_{C}\) unburned carbon loss –
\(L_{ash}\) sensible heat in ash –
\(L_{r}\) surface radiation and convection loss –
\(L_{u}\) unaccounted loss and margin –
\(B\) heat credits as a share of input –
\(\eta\) boiler efficiency on GCV –
\(\Sigma L\) total losses –
\(\dot Q_{out}\) heat to steam W
\(\dot Q_L\) total heat lost W
\(\dot Q_{dg}\) heat lost in dry flue gas W
\(\dot Q_{w}\) heat lost in water vapour W

Method and standards

Efficiency by the energy-balance (heat-loss) method of ASME PTC 4 §5: efficiency is 100 % less losses plus credits, all as fractions of the fuel input on the gross calorific value. Indian practice (IS 8753, BEE audit guides) uses the same list of losses.

Where it is used

  • Presenting an efficiency test or energy audit as a heat balance sheet or Sankey diagram.
  • Checking a boiler maker's guaranteed efficiency breakdown at the proposal stage.
  • Ranking improvement projects by the size of each loss in MW.
  • Training operators on where the fuel's heat goes.

Common mistakes

  • Mixing losses computed on NCV with others on GCV.
  • Counting the manufacturer's margin twice: it is often already inside the unaccounted line.
  • Entering a credit as a negative loss and again as a credit.
  • Taking the surface loss of a large boiler as a fixed 2 %: it is a fraction of 1 % at full load and rises at part load.

Assumptions and limits

  • Each loss is entered as a fraction of the heat input on GCV; this page does not compute the losses themselves.
  • Credits are entered as one combined fraction: entering air and fuel above the reference temperature, a steam air heater, mill power.
  • All losses and credits must be referred to the same reference temperature (25 °C in ASME PTC 4; the ambient air temperature in BS 845 and IS 8753, which then has no air credit).
  • A warning appears above 95 % efficiency on GCV.

References

  • ASME PTC 4-2013 Fired Steam Generators §5.14 (losses) and §5.15 (credits)
  • BIS IS 8753 (boiler efficiency)

Questions and answers

What is a boiler energy balance?

A sheet that splits the heat in the fuel into heat to steam and each loss. For an 80 MW coal boiler with losses of 16.9 % and credits of 0.5 %, the efficiency is 83.6 %; 66.9 MW reaches the steam and 13.5 MW is lost, 4.4 MW of it in dry flue gas.

Where do the individual losses come from?

From the indirect-method calculation (boiler efficiency, ASME PTC 4) or the separate loss calculators here for unburned carbon, CO, ash sensible heat and surface loss. This page adds them up and turns them into MW.

Which losses are usually the largest?

Dry flue gas and water vapour from hydrogen and moisture, together 10–15 % for coal. Unburned carbon matters for high-ash coal and fluidised beds; surface loss is under 1 % for large boilers but 1–3 % for small shell boilers.

Method and article reviewed by FireCAD engineering on 10 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.