FireCADCalc

Van Laar Activity Coefficients for a Binary Mixture

Activity coefficients of a binary liquid by the van Laar equation from the two end-point constants (ln γ at infinite dilution), with excess Gibbs energy.

Refinery and petrochemicalChemical and fertiliser

Inputs

Examples: A12 1.6, A21 0.9Symmetric 1.0

Results

Activity coefficient of 11.2840
Activity coefficient of 21.2840
Excess Gibbs energy / RT0.25000

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: A12 1.6, A21 0.9. The inputs, in the units selected above:

InputValue
Mole fraction of component 130.000 %
Van Laar constant A₁₂ (= ln γ₁∞)1.6000 -
Van Laar constant A₂₁ (= ln γ₂∞)0.90000 -

Applying the formula below gives:

ResultValue
Activity coefficient of 11.6743
Activity coefficient of 21.1833
Excess Gibbs energy / RT0.27243

Open this example in the calculator and change any input.

Formula

\(\ln\gamma_1 = A_{12}\left(\frac{A_{21}x_2}{A_{12}x_1 + A_{21}x_2}\right)^2, \quad \ln\gamma_2 = A_{21}\left(\frac{A_{12}x_1}{A_{12}x_1 + A_{21}x_2}\right)^2\)

Variables

Symbol Meaning SI unit
\(x_1\) Mole fraction of component 1 -
\(A_{12}\) Van Laar constant A₁₂ (= ln γ₁∞) -
\(A_{21}\) Van Laar constant A₂₁ (= ln γ₂∞) -
\(\gamma_1\) Activity coefficient of 1 -
\(\gamma_2\) Activity coefficient of 2 -
\(G^E/RT\) Excess Gibbs energy / RT -

Method and standards

Van Laar equation.

Where it is used

  • Quick VLE estimates.
  • Teaching non-ideality.

Common mistakes

  • Using base-10 constants as natural logs.

Assumptions and limits

  • Positive constants; binary.

References

  • Perry's Chemical Engineers' Handbook
  • 9th ed. (McGraw-Hill, 2019)
  • sec. 4 (thermodynamics: excess Gibbs energy models)
  • van Laar model

Questions and answers

What are the constants?

The logarithms of the activity coefficients at infinite dilution.

When does van Laar fail?

For constants of opposite sign and strongly associating mixtures.

How do I fit them?

From an azeotrope point or two infinite-dilution measurements.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.