FireCADCalc

Underwood Minimum Reflux, Multicomponent (Up to 4)

Minimum reflux of a multicomponent distillation by the Underwood equations: the common root θ between the key volatilities, then Rmin from the distillate.

Refinery and petrochemicalChemical and fertiliser

Inputs

Examples: Three components, LK = 2Four components, LK = 2, q 0.8

Results

The distillate composition should be the one at minimum reflux; with sharp key splits the non-keys lie wholly in one product.

Underwood root1.2835
Minimum reflux ratio1.2297

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Three components, LK = 2. The inputs, in the units selected above:

InputValue
Feed condition q1.0000 -
Light key is component2
α of component 1 (relative to any one reference component)4.0000 -
α of component 22.0000 -
α of component 31.0000 -
α of component 4 (0 = absent)0 -
Feed mole fraction of 120.000 %
Feed mole fraction of 240.000 %
Feed mole fraction of 340.000 %
Feed mole fraction of 40 %
Distillate mole fraction of 133.000 %
Distillate mole fraction of 265.000 %
Distillate mole fraction of 32.0000 %
Distillate mole fraction of 40 %

Applying the formula below gives:

ResultValue
Underwood root1.2835
Minimum reflux ratio1.2297

Open this example in the calculator and change any input.

Formula

\(\sum_i \frac{\alpha_i z_i}{\alpha_i - \theta} = 1 - q, \quad R_{min} + 1 = \sum_i \frac{\alpha_i x_{D,i}}{\alpha_i - \theta}\)

Variables

Symbol Meaning SI unit
\(q\) Feed condition q -
\(\text{LK}\) Light key is component -
\(\alpha_1\) α of component 1 (relative to any one reference component) -
\(\alpha_2\) α of component 2 -
\(\alpha_3\) α of component 3 -
\(\alpha_4\) α of component 4 (0 = absent) -
\(z_1\) Feed mole fraction of 1 -
\(z_2\) Feed mole fraction of 2 -
\(z_3\) Feed mole fraction of 3 -
\(z_4\) Feed mole fraction of 4 -
\(x_{D,1}\) Distillate mole fraction of 1 -
\(x_{D,2}\) Distillate mole fraction of 2 -
\(x_{D,3}\) Distillate mole fraction of 3 -
\(x_{D,4}\) Distillate mole fraction of 4 -
\(\theta\) Underwood root -
\(R_{min}\) Minimum reflux ratio -

Method and standards

Underwood equations solved by bisection for the root between the keys.

Where it is used

  • Short-cut multicomponent column design.

Common mistakes

  • Using the wrong root.
  • Distillate fractions not at minimum reflux.

Assumptions and limits

  • Constant α and molar overflow.
  • Volatilities may be relative to any one component (a value below 1 is allowed for components heavier than the reference), in falling order.
  • Feed and distillate fractions within ±1 % of 1 are accepted as entered, without normalising.
  • Both keys must be in the feed, and a root must be found between their volatilities.

References

  • Perry's Chemical Engineers' Handbook
  • 9th ed. (McGraw-Hill, 2019)
  • sec. 13 (distillation)
  • Underwood equations (13-37) and (13-38)

Questions and answers

Which root is used?

The one between the volatilities of the light and heavy keys.

Why must α be relative to one reference?

Underwood uses ratios; any common reference works, usually the heaviest component.

Why does Perry's ask for four decimals in θ?

α − θ can be small, so small errors in θ swing Rmin.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.