FireCADCalc

Minimum Reflux Ratio of a Binary Column (Pinch at the q-Line)

Minimum reflux ratio of a binary distillation with constant relative volatility from the pinch where the q-line meets the equilibrium curve, and a design reflux.

Sugar mill and cogenerationRefinery and petrochemicalChemical and fertiliser

Inputs

Examples: Saturated liquid feedPart-vaporised feed q = 0.5Sub-cooled feed q = 1.2

Results

Assumes the pinch is at the feed (no tangent pinch), constant α and constant molal overflow.

Pinch liquid composition29.216%
Pinch vapour composition50.784%
Minimum reflux ratio2.0500
Design reflux ratio2.6651

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Saturated liquid feed. The inputs, in the units selected above:

InputValue
Relative volatility2.5000 -
Feed (light component mole fraction)40.000 %
Distillate purity95.000 %
Feed condition q (1 saturated liquid, 0 saturated vapour)1.0000 -
Design reflux multiple1.3000 -

Applying the formula below gives:

ResultValue
Pinch liquid composition40.000 %
Pinch vapour composition62.500 %
Minimum reflux ratio1.4444
Design reflux ratio1.8778

Open this example in the calculator and change any input.

Formula

\(y = \frac{\alpha x}{1 + (\alpha - 1)x}, \quad y = \frac{q}{q - 1}x - \frac{x_F}{q - 1}, \quad R_{min} = \frac{x_D - y^*}{y^* - x^*}\)

Variables

Symbol Meaning SI unit
\(\alpha\) Relative volatility -
\(x_F\) Feed (light component mole fraction) -
\(x_D\) Distillate purity -
\(q\) Feed condition q (1 saturated liquid, 0 saturated vapour) -
\(R/R_{min}\) Design reflux multiple -
\(x^*\) Pinch liquid composition -
\(y^*\) Pinch vapour composition -
\(R_{min}\) Minimum reflux ratio -
\(R\) Design reflux ratio -

Method and standards

McCabe–Thiele pinch.

Where it is used

  • Column design and debottlenecking.
  • Solvent recovery columns.

Common mistakes

  • Using it for azeotropes.
  • Wrong q for the feed state.

Assumptions and limits

  • Constant α and molal overflow.
  • The design multiple R/R_min is at least 1.

References

  • McCabe–Thiele: pinch at the intersection of the q-line and the equilibrium curve y = αx/(1 + (α − 1)x); R_min = (x_D − y*)/(y* − x*)

Questions and answers

α 2.5, x_F 0.4, x_D 0.95, saturated liquid feed?

Pinch at x 0.4, y 0.625: R_min 1.44.

Design reflux?

Usually 1.1–1.5 × R_min, set by energy versus column cost.

Non-ideal mixtures?

A tangent pinch can occur above the feed; plot the curve.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.