FireCADCalc

Crystalliser Yield (Anhydrous Crystals)

Mass of anhydrous crystals from a cooling or evaporative crystalliser from the feed, its solute content, the final solubility and the water evaporated.

Sugar mill and cogenerationRefinery and petrochemicalChemical and fertiliser

Inputs

Examples: Cooling with 10 % evaporationUnsaturated: no crystals

From a solubility table.

Results

Equilibrium yield; hydrated crystals carry water and need the hydrate form of the balance.

Crystals formed174.00kg
Mother liquor756.00kg
Yield (share of solute crystallised)58.000%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Cooling with 10 % evaporation. The inputs, in the units selected above:

InputValue
Feed solution1,000.0 kg
Solute mass fraction in the feed30.000 %
Solubility at the final temperature (kg solute per kg water)0.20000 -
Share of the feed water evaporated10.000 %

Applying the formula below gives:

ResultValue
Crystals formed174.00 kg
Mother liquor756.00 kg
Yield (share of solute crystallised)58.000 %

Open this example in the calculator and change any input.

Formula

\(C = F w_F - S\, F(1 - w_F)(1 - E)\)

Variables

Symbol Meaning SI unit
\(F\) Feed solution kg
\(w_F\) Solute mass fraction in the feed -
\(S\) Solubility at the final temperature (kg solute per kg water) -
\(E\) Share of the feed water evaporated -
\(C\) Crystals formed kg
\(M_L\) Mother liquor kg
\(Y\) Yield (share of solute crystallised) -

Method and standards

Mass balance.

Where it is used

  • Salt, sugar and fertiliser crystallisers.
  • ZLD crystallisers.

Common mistakes

  • Solubility per kg solution vs per kg water.
  • Ignoring hydrate water.

Assumptions and limits

  • Anhydrous crystals at equilibrium. Hydrated crystals are not handled: their water of crystallisation must be added to the balance.
  • No mother liquor adheres to the crystals; washing and drying losses are not counted.

References

  • Solute and water mass balance with the final solubility

Questions and answers

1000 kg at 30 % cooled to a solubility of 0.2 with 10 % of the water evaporated?

174 kg of crystals: 58 % yield.

Hydrates?

Crystals that hold water need the hydrate's molar ratio in the balance.

Real yield?

Lower: mother liquor sticks to the crystals and supersaturation remains.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.