Worked example
Example: Indian coal 4500/t, 15.5 MJ/kg, 74 % vs imported 9000/t, 24 MJ/kg, 82 %. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Price per tonne (your currency) | 4,500.0 - |
| Gross calorific value | 15,500 kJ/kg |
| Boiler efficiency on this fuel (GCV) | 74.000 % |
| Price per tonne (your currency) | 9,000.0 - |
| Gross calorific value | 24,000 kJ/kg |
| Boiler efficiency on this fuel (GCV) | 82.000 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Fuel 1: cost per GJ of useful heat | 392.33 |
| Fuel 2: cost per GJ of useful heat | 457.32 |
| Fuel 2 compared with fuel 1 (+ = dearer) | 16.565 % |
| Fuel 1: cost per GJ of fuel | 290.32 |
| Fuel 2: cost per GJ of fuel | 375.00 |
Open this example in the calculator and change any input.
Formula
\(c_{GJ} = \frac{c}{GCV} \qquad C = \frac{c_{GJ}}{\eta} \qquad \Delta = \frac{C_2}{C_1} - 1\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(c_1\) | price of fuel 1 per tonne | – |
| \(GCV_1\) | GCV of fuel 1 | J/kg |
| \(\eta_1\) | efficiency on fuel 1 | – |
| \(c_2\) | price of fuel 2 per tonne | – |
| \(GCV_2\) | GCV of fuel 2 | J/kg |
| \(\eta_2\) | efficiency on fuel 2 | – |
| \(C_1\) | fuel 1 cost per useful GJ | – |
| \(C_2\) | fuel 2 cost per useful GJ | – |
| \(\Delta\) | fuel 2 against fuel 1 | – |
| \(c_{GJ,1}\) | fuel 1 cost per GJ of fuel | – |
| \(c_{GJ,2}\) | fuel 2 cost per GJ of fuel | – |
| \(c, GCV, c_{GJ}, C, \eta\) | price, calorific value, costs and efficiency in general | – |
Method and standards
Cost per GJ from price per tonne and GCV; useful heat divides by boiler efficiency on that fuel.
Where it is used
- Fuel switching and procurement decisions.
- Budgeting steam cost.
- Biomass versus coal studies.
Common mistakes
- Comparing prices per tonne directly.
- Using the same efficiency for very different fuels.
- Mixing GCV and NCV between fuels.
Assumptions and limits
- Prices delivered to the boiler, per metric tonne in every unit system, for the fuel as received; the GCV must be on the same as-received moisture basis.
- Efficiency on GCV; there is no NCV option. The outputs are in currency per GJ whatever the display units of the GCV.
- When fuel 1 is free, the percentage comparison is not shown.
References
- Definitions of energy cost
Questions and answers
Which fuel is cheaper per unit of heat?
Indian coal at 4500 per tonne and 15.5 MJ/kg costs 290 per GJ; at 74 % efficiency 392 per useful GJ. Imported coal at 9000 and 24 MJ/kg costs 375 per GJ, 457 per useful GJ at 82 %: 17 % dearer.
Why include efficiency?
A fuel burned less efficiently delivers less useful heat; comparing per GJ of fuel alone favours poor fuels.
What else should I add?
Handling, storage, ash disposal, emissions control and maintenance differences.
Method and article reviewed by FireCAD engineering on 11 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.