Worked example
Example: Natural gas. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Methane (CH4) | 95.000 % |
| Ethane (C2H6) | 2.5000 % |
| Propane (C3H8) | 0.20000 % |
| Butane (C4H10) | 0 % |
| Pentane (C5H12) | 0 % |
| Ethylene (C2H4) | 0 % |
| Propylene (C3H6) | 0 % |
| Benzene (C6H6) | 0 % |
| Hydrogen (H2) | 0 % |
| Carbon monoxide (CO) | 0 % |
| Hydrogen sulphide (H2S) | 0 % |
| Water vapour (H2O) | 0 % |
| Carbon dioxide (CO2) | 0.60000 % |
| Nitrogen (N2) | 1.7000 % |
| Oxygen (O2) | 0 % |
| Sulphur dioxide (SO2) | 0 % |
| Excess air | 10.000 % |
| Air humidity (kg water per kg dry air) | 0.013000 kg/kg |
Applying the formula below gives:
| Result | Value |
|---|---|
| Molar mass of the fuel gas | 16.821 kg/kmol |
| Fuel gas density (normal) | 0.75047 kg/m³ |
| Gross calorific value per Nm³ | 39,686 kJ/Nm³ |
| Net calorific value per Nm³ | 35,795 kJ/Nm³ |
| Gross calorific value per kg | 52,882 kJ/kg |
| Net calorific value per kg | 47,696 kJ/kg |
| Stoichiometric oxygen | 1.9975 Nm³/Nm³ |
| Theoretical dry air | 9.5346 Nm³/Nm³ |
| Actual wet air | 10.707 Nm³/Nm³ |
| Wet flue gas | 11.722 Nm³/Nm³ |
| Dry flue gas | 9.5196 Nm³/Nm³ |
| Actual wet air | 18.295 kg/kg |
| Wet flue gas | 19.295 kg/kg |
| Dry flue gas | 16.937 kg/kg |
| CO₂ in wet flue gas | 8.6693 % |
| H₂O in wet flue gas | 18.787 % |
| N₂ in wet flue gas | 70.007 % |
| Ar in wet flue gas | 0.83212 % |
| O₂ in wet flue gas | 1.7041 % |
| SO₂ in wet flue gas | 0 % |
| O₂ in dry flue gas (analyser reading) | 2.0983 % |
Open this example in the calculator and change any input.
Formula
Per mole of each combustible C_cH_hS_sO_o burned to CO₂, H₂O and SO₂:
\(V_{O_2} = \sum_i y_i\left(c_i + \frac{h_i}{4} + s_i - \frac{o_i}{2}\right) - y_{O_2,f} \qquad V_{a,th} = \frac{V_{O_2}}{0.2095} \qquad V_{a} = V_{a,th}(1 + EA) \qquad V_{a,wet} = V_a + \omega\,V_a\frac{M_{air}}{M_{H_2O}}\)
\(V_{CO_2} = \sum_i y_i c_i + y_{CO_2,f} + 0.0004\,V_a \qquad V_{H_2O} = \sum_i y_i \frac{h_i}{2} + y_{H_2O,f} + \omega V_a \frac{M_{air}}{M_{H_2O}} \qquad V_{SO_2} = \sum_i y_i s_i + y_{SO_2,f} \qquad V_{N_2+Ar} = y_{N_2,f} + 0.7901\,V_a \qquad V_{O_2,x} = 0.2095\,V_a - V_{O_2}\)
\(V_{g,wet} = V_{CO_2} + V_{H_2O} + V_{SO_2} + V_{N_2+Ar} + V_{O_2,x} \qquad V_{g,dry} = V_{g,wet} - V_{H_2O} \qquad m_j = \frac{V_j\,M_j}{M_f}\)
Heating values from the standard molar heats of combustion \(\Delta H_{c,i}\) at 25 °C:
\(M_f = \sum_i y_i M_i \qquad \rho_f = \frac{M_f}{V_m} \qquad GCV_v = \frac{\sum_i y_i\,\Delta H_{c,i}}{V_m} \qquad NCV_v = GCV_v - \frac{\sum_{i\,\in\,\text{combustibles}} y_i\,\tfrac{h_i}{2}\,h_{fg,25}\,M_{H_2O}}{V_m} \qquad GCV = \frac{GCV_v}{\rho_f}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(y_{CH_4}\), \(y_{C_2H_6}\), \(y_{C_3H_8}\), \(y_{C_4H_{10}}\), \(y_{C_5H_{12}}\), \(y_{C_2H_4}\), \(y_{C_3H_6}\), \(y_{C_6H_6}\), \(y_{H_2}\), \(y_{CO}\), \(y_{H_2S}\) | combustible species, volume fractions of the fuel gas | – |
| \(y_{H_2O}\), \(y_{CO_2}\), \(y_{N_2}\), \(y_{O_2}\), \(y_{SO_2}\) | inert and oxygen species of the fuel gas (as inputs) | – |
| \(c_i\), \(h_i\), \(s_i\), \(o_i\) | atoms of C, H, S, O in species i | – |
| \(EA\) | excess air fraction | – |
| \(\omega\) | humidity of combustion air, kg water per kg dry air | kg/kg |
| \(M_f\) | molar mass of the fuel gas | kg/kmol |
| \(\rho_f\) | fuel gas density at 0 °C and 101.325 kPa | kg/Nm³ |
| \(GCV_v\), \(NCV_v\) | gross and net calorific value per normal cubic metre | J/Nm³ |
| \(GCV\), \(NCV\) | gross and net calorific value per kilogram | J/kg |
| \(V_{O_2}\) | stoichiometric oxygen per Nm³ fuel | Nm³/Nm³ |
| \(V_{a,th}\), \(V_{a,wet}\) | theoretical dry air and actual wet air per Nm³ fuel | Nm³/Nm³ |
| \(V_{g,wet}\), \(V_{g,dry}\) | wet and dry flue gas per Nm³ fuel | Nm³/Nm³ |
| \(m_{a,wet}\), \(m_{g,wet}\), \(m_{g,dry}\) | the same per kg of fuel | kg/kg |
| \(y_{CO_2}\), \(y_{H_2O}\), \(y_{N_2}\), \(y_{Ar}\), \(y_{O_2}\), \(y_{SO_2}\) | wet flue gas composition by volume (as outputs) | – |
| \(y_{O_2,dry}\) | oxygen in dry flue gas, as an analyser reads it | – |
| \(V_m\) | molar volume at normal conditions, 22.41397 | Nm³/kmol |
| \(h_{fg,25}\) | latent heat of water at 25 °C (IF97) | J/kg |
Method and standards
Volumetric stoichiometry at normal conditions with PTC 4 air (20.95 % O₂, 79.05 % atmospheric nitrogen, carried as N₂ + Ar + CO₂). Heating values are built from the standard molar enthalpies of combustion of each species at 25 °C (NIST Chemistry WebBook) divided by the ideal-gas molar volume, so the GCV of methane is 890.6 kJ/mol ÷ 22.414 L/mol = 39.73 MJ/Nm³. The net value subtracts the IF97 latent heat of the water formed. Mass-basis results divide by the fuel gas molar mass.
Where it is used
- Combustion calculations for natural gas, biogas, LPG and refinery gas.
- Gas burner air and flue gas flows.
- Emission reports for gas-fired units.
Common mistakes
- Using a composition by mass as one by volume.
- Forgetting inerts (N2, CO2) in the gas.
- Mixing GCV and NCV.
Assumptions and limits
- Ideal gas: volume fraction equals mole fraction; real-gas corrections (about 1–2 % for propane and butane at normal conditions) are not applied.
- Complete combustion; H₂S goes entirely to SO₂.
- Air is 78.08 % N₂, 0.93 % Ar and 0.04 % CO₂ besides its oxygen: the air's CO₂ is counted in \(y_{CO_2}\) and the N₂ + Ar in \(V_{N_2+Ar}\). The water vapour already in the fuel gas is not deducted from the NCV.
- An analysis that does not sum to 100 % is normalised with a warning; check it before relying on the result.
- Volumes per Nm³ are at 0 °C and 101.325 kPa; values shown per scf are converted to the US standard cubic foot (60 °F, 14.696 psia).
- Benzene is taken as vapour; hydrocarbons heavier than pentane are not listed and should be lumped into pentane by carbon content.
References
- ASME PTC 4-2013 (air composition)
- NIST Chemistry WebBook (standard enthalpies of combustion at 25 °C)
- ideal gas at 0 °C and 101.325 kPa
Questions and answers
What is a normal cubic metre?
Gas volume referred to 0 °C and 101.325 kPa, treated as an ideal gas (22.414 m³ per kmol). Suppliers sometimes quote standard cubic metres at 15 °C, which are 5.5 % larger; convert before entering.
Why is the GCV per Nm³ of ethane almost twice that of methane?
Heating value per mole scales with the carbon and hydrogen atoms burned: ethane releases 1 561 kJ/mol against 891 kJ/mol for methane, and a normal cubic metre holds the same number of moles of either.
How does this handle inerts in the fuel gas?
CO₂, N₂ and water vapour in the fuel pass straight into the flue gas, lower the heating value per Nm³ and increase the flue gas per unit of heat. Oxygen in the fuel reduces the air needed.
Method and article reviewed by FireCAD engineering on 10 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.