Worked example
Example: Bagasse with coal. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Fuel 1 rate (e.g. bagasse) | 30.000 t/h |
| Fuel 1 GCV, as fired | 9,600.0 kJ/kg |
| Fuel 1 price per tonne | 1,800.0 - |
| Fuel 2 rate (e.g. coal) | 4.0000 t/h |
| Fuel 2 GCV, as fired | 23,000 kJ/kg |
| Fuel 2 price per tonne | 9,000.0 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| Total heat input | 105.56 MW |
| Fuel 1 share of heat | 75.789 % |
| Fuel 2 share of heat | 24.211 % |
| Blended cost per GJ | 236.84 |
Open this example in the calculator and change any input.
Formula
\(\dot Q = \dot m_1 GCV_1 + \dot m_2 GCV_2, \quad s_1 = \frac{\dot m_1 GCV_1}{\dot Q}, \quad s_2 = \frac{\dot m_2 GCV_2}{\dot Q}\)
\(c_{GJ} = \frac{(\dot m_1 c_1 + \dot m_2 c_2)/1000\ \text{kg/t}}{\dot Q} \times 10^9\ \text{J/GJ}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\dot m_1\) | Fuel 1 rate (e.g. bagasse) | kg/s |
| \(GCV_1\) | Fuel 1 GCV | J/kg |
| \(c_1\) | Fuel 1 price per tonne | - |
| \(\dot m_2\) | Fuel 2 rate (e.g. coal) | kg/s |
| \(GCV_2\) | Fuel 2 GCV | J/kg |
| \(c_2\) | Fuel 2 price per tonne | - |
| \(\dot Q\) | Total heat input | W |
| \(s_1\) | Fuel 1 share of heat | - |
| \(s_2\) | Fuel 2 share of heat | - |
| \(c_{GJ}\) | Blended cost per GJ | - |
Method and standards
Energy balance.
Where it is used
- Off-season fuel planning.
- Fuel purchase decisions.
Common mistakes
- Net and gross values mixed.
Assumptions and limits
- Steady firing.
- Each GCV must be on the as-fired basis of its own fuel rate; mixing an as-fired value with a dry one distorts the heat shares.
References
- Energy balance on gross calorific values
Questions and answers
Why heat share, not mass share?
Coal carries more than twice the heat of wet bagasse per tonne.
Currency?
Any, as long as both prices use the same one.
Efficiency changes with the mix?
Yes: compare cost per tonne of steam with each mix's efficiency.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.