FireCADCalc

Gas Composition: Mass % to Volume %

Converts a gas analysis by mass to volume (mole) fractions and gives the mixture molar mass.

Refinery and petrochemicalChemical and fertiliser

Inputs

Examples: Dry air by massCoal flue gas by mass

Composition by mass

Results

Oxygen by volume20.952%
Nitrogen by volume78.081%
Carbon dioxide by volume0.039483%
Water vapour by volume0%
Sulphur dioxide by volume0%
Carbon monoxide by volume0%
Hydrogen by volume0%
Argon by volume0.92793%
Mixture molar mass28.966kg/kmol

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Dry air by mass. The inputs, in the units selected above:

InputValue
Oxygen (O2) by mass23.150 %
Nitrogen (N2) by mass75.530 %
Carbon dioxide (CO2) by mass0.060000 %
Water vapour (H2O) by mass0 %
Sulphur dioxide (SO2) by mass0 %
Carbon monoxide (CO) by mass0 %
Hydrogen (H2) by mass0 %
Argon (Ar) by mass1.2800 %

Applying the formula below gives:

ResultValue
Oxygen by volume20.952 %
Nitrogen by volume78.081 %
Carbon dioxide by volume0.039483 %
Water vapour by volume0 %
Sulphur dioxide by volume0 %
Carbon monoxide by volume0 %
Hydrogen by volume0 %
Argon by volume0.92793 %
Mixture molar mass28.966 kg/kmol

Open this example in the calculator and change any input.

Formula

\(n_i = \frac{w_i}{M_i} \qquad y_i = \frac{n_i}{\sum_j n_j} \qquad M = \frac{\sum_i w_i}{\sum_i w_i / M_i}\)

Variables

Symbol Meaning SI unit
\(w_i\) mass fraction of species i: \(w_{O_2}\), \(w_{N_2}\), \(w_{CO_2}\), \(w_{H_2O}\), \(w_{SO_2}\), \(w_{CO}\), \(w_{H_2}\), \(w_{Ar}\) –
\(M_i\) molar mass of species i kg/kmol
\(n_i\) moles of species i per kilogram of mixture kmol/kg
\(y_i\) mole (volume) fraction of species i: \(y_{O_2}\), \(y_{N_2}\), \(y_{CO_2}\), \(y_{H_2O}\), \(y_{SO_2}\), \(y_{CO}\), \(y_{H_2}\), \(y_{Ar}\) –
\(M\) molar mass of the mixture kg/kmol

Method and standards

Molar masses from IUPAC 2013 conventional atomic weights. Exact for ideal-gas mixtures.

Where it is used

  • Converting gas mass flows to volume for fans and ducts.
  • Flow meter ranges.
  • Fuel gas and flue gas calculations.

Common mistakes

  • Mixing normal and standard conditions.
  • Forgetting temperature and pressure for actual volume.
  • Using dry composition for wet gas.

Assumptions and limits

  • Ideal gas: mole fraction equals volume fraction.
  • Fractions that do not sum to 1 are normalised; the page reports the original sum. With Σw = 1 the molar mass is 1/Σ(w_i/M_i).
  • Only O₂, N₂, CO₂, H₂O, SO₂, CO, H₂ and Ar can be entered; hydrocarbons and H₂S of a fuel gas are not covered.

References

  • IUPAC 2013 standard atomic weights

Questions and answers

Why do light gases such as hydrogen take so much more volume than mass?

Volume fraction follows moles, and a kilogram of hydrogen is about 496 moles while a kilogram of CO₂ is about 23 moles. The same mass of hydrogen occupies 22 times the volume.

Method and article reviewed by FireCAD engineering on 10 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.