Worked example
Example: Ganapathy: 30 °API, 0.5 % S. The inputs, in the units selected above:
| Input | Value |
|---|---|
| API gravity | 30.000 - |
| Sulphur | 0.50000 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Specific gravity at 60 °F | 0.87616 |
| Density at 60 °F | 875.28 kg/m³ |
| Hydrogen | 12.058 % |
| Higher heating value | 45.499 MJ/kg |
| Lower heating value | 42.940 MJ/kg |
| Higher heating value per litre of oil (60 °F) | 39.824 MJ/L |
Open this example in the calculator and change any input.
Formula
\(HHV = 17\,887 + 57.5\,°API - 102.2\,\%S \ \ (\mathrm{Btu/lb}), \quad \%H_2 = F - \frac{2122.5}{°API + 131.5}, \quad LHV = HHV - 91.23\,\%H_2, \quad SG = \frac{141.5}{131.5 + °API}\)
\(\rho = 999.0\,SG, \quad HHV_V = HHV\,\rho\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(°API\) | API gravity | - |
| \(S\) | Sulphur | - |
| \(SG\) | Specific gravity at 60 °F | - |
| \(\rho\) | Density at 60 °F | kg/m³ |
| \(H_2\) | Hydrogen | - |
| \(HHV\) | Higher heating value | J/kg |
| \(LHV\) | Lower heating value | J/kg |
| \(HHV_V\) | Higher heating value per volume of liquid oil at 60 °F | J/m³ |
| \(F\) | hydrogen constant by °API band | % |
Method and standards
Ganapathy's correlations; F = 24.50 (0 to 9 °API), 25.00 (above 9 to 20), 25.20 (above 20 to 30), 25.45 (above 30 to 40): a value on a band edge takes the lower band. The steps make the hydrogen and LHV jump slightly at 9, 20 and 30 °API.
Where it is used
- Fuel oil purchase checks.
- Boiler efficiency calculations without an ultimate analysis.
Common mistakes
- Using the correlation for non-petroleum oils.
- Entering sulphur as a fraction instead of %.
Assumptions and limits
- Petroleum fuel oils, 0–40 °API, sulphur 0–6 %.
- The LHV deducts only the water formed from hydrogen; the oil is taken as water-free.
References
- Ganapathy
- Steam Plant Calculations Manual
- 2nd ed. (Marcel Dekker, 1993)
- Q2.02
- Eqs. (4a)
- (4b)
- (5) and (6)
- Water density at 60 °F taken as 999.0 kg/m³
Questions and answers
How accurate is it?
It is an empirical estimate for petroleum fuel oils; use a bomb calorimeter result for contracts and guarantees.
Why does sulphur lower the HHV?
Sulphur replaces carbon and hydrogen, which release far more heat per kilogram.
What is 30 °API?
Specific gravity 0.876. The correlation gives 19,612 Btu/lb HHV with no sulphur and 19,561 Btu/lb (45.50 MJ/kg) at 0.5 % sulphur.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.