FireCADCalc

Flue Gas and Air per kg of Fuel from Orsat Analysis

Mass and volume of dry flue gas and the air supplied per kg of fuel from the carbon in the fuel and the dry flue gas analysis, by the carbon balance.

Thermal power plantProcess steam and utilitiesSugar mill and cogenerationRefinery and petrochemicalPulp and paperASME PTC 4 (fired steam generators)Burner and furnaceFan and blowerBoiler attendant and boiler operator examinations

Inputs

Examples: Coal with 60 % C: 12 % CO₂, 7 % O₂, 0.5 % COOil with 85 % C: 13 % CO₂, 3.5 % O₂Bagasse 23 % C: 15 % CO₂, 5 % O₂, 0.3 % CO

Results

Carbon balance: every kmol of carbon burnt gives one kmol of CO₂ + CO. Sulphur and fuel nitrogen are ignored, as in the textbook method.

Dry flue gas per kg of fuel12.122kg/kg
Dry flue gas per kg of fuel at 0 °C, 101.325 kPa8.9574Nm³/kg
Air supplied per kg of fuel11.788kg/kg
Share of the carbon burnt only to CO4.0000%
Molar mass of the dry flue gas30.332kg/kmol

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Coal with 60 % C: 12 % CO₂, 7 % O₂, 0.5 % CO. The inputs, in the units selected above:

InputValue
Carbon in the fuel (burnt carbon, by mass)60.000 %
Carbon dioxide (dry, by volume)12.000 %
Oxygen (dry, by volume)7.0000 %
Carbon monoxide (dry, by volume)0.50000 %

Applying the formula below gives:

ResultValue
Dry flue gas per kg of fuel12.122 kg/kg
Dry flue gas per kg of fuel at 0 °C, 101.325 kPa8.9574 Nm³/kg
Air supplied per kg of fuel11.788 kg/kg
Share of the carbon burnt only to CO4.0000 %
Molar mass of the dry flue gas30.332 kg/kmol

Open this example in the calculator and change any input.

Formula

\(n_{dg} = \frac{C / M_C}{CO_2 + CO}\)

\(m_{dg} = n_{dg} \sum y_i M_i, \quad V_{dg} = n_{dg}\, V_m\)

\(m_a = n_{dg}\, \frac{N_2}{0.7905}\, M_{air}\)

Variables

Symbol Meaning SI unit
\(C\) Carbon in the fuel (burnt carbon, by mass) -
\(CO_2\) Carbon dioxide (dry, by volume) -
\(O_2\) Oxygen (dry, by volume) -
\(CO\) Carbon monoxide (dry, by volume) -
\(m_{dg}\) Dry flue gas per kg of fuel kg/kg
\(V_{dg}\) Dry flue gas per kg of fuel at 0 °C, 101.325 kPa m³/kg
\(m_a\) Air supplied per kg of fuel kg/kg
\(f_{CO}\) Share of the carbon burnt only to CO -
\(M_{dg}\) Molar mass of the dry flue gas kg/kmol
\(n_{dg}\) dry flue gas per kg of fuel kmol/kg
\(N_2\) nitrogen by difference, \(1 - CO_2 - O_2 - CO\) -
\(M_C\) atomic mass of carbon, 12.011 kg/kmol
\(y_i\), \(M_i\) volume fractions and molar masses of CO₂, O₂, CO and atmospheric nitrogen -, kg/kmol
\(V_m\) molar volume at 0 °C, 101.325 kPa, 22.414 m³/kmol
\(M_{air}\) molar mass of dry air, 28.96 kg/kmol

Method and standards

Every kmol of carbon burnt makes one kmol of CO₂ + CO, which fixes the moles of dry gas; the nitrogen in it fixes the air supplied.

Worked example

Coal with 60 % carbon gives a flue gas of 12 % CO₂, 7 % O₂, 0.5 % CO, 80.5 % N₂ by volume.

  • Textbook: (11 × 12 + 8 × 7 + 7 × (0.5 + 80.5)) / (3 × (12 + 0.5)) × 0.6 = 12.1 kg dry gas per kg of coal
  • Air supplied: the 80.5 % nitrogen came with 11.8 kg of air per kg of coal

Where it is used

  • Boiler attendant and operator examinations.
  • Dry flue gas loss and fan duty from a flue gas test.
  • Checking the air supply to a furnace.

Common mistakes

  • Using total carbon when some is left unburnt in the ash.
  • Using a wet analysis.
  • Forgetting that sulphur also forms gas (small).

Assumptions and limits

  • Fuel nitrogen and sulphur neglected. An Orsat absorbs SO₂ with the CO₂, and the air's own 0.04 % CO₂ is counted too, so the carbon-bearing moles are slightly overstated.
  • The nitrogen by difference is given the molar mass of atmospheric nitrogen (N₂ with argon and air CO₂, 28.16 kg/kmol), not 28.01; the textbook form uses 28, so the two differ by under 1 %.
  • Carbon entered is the carbon actually burnt.

References

  • Carbon and nitrogen balances (textbook)
  • IUPAC 2013 molar masses; ASME PTC 4-2013 air

Questions and answers

How much dry flue gas does coal with 60 % carbon make at 12 % CO₂, 7 % O₂, 0.5 % CO?

12.1 kg per kg of coal (8.96 Nm³/kg), with 11.8 kg of air supplied.

What is the textbook form?

Dry flue gas per kg = (11 CO₂ + 8 O₂ + 7 (CO + N₂)) / (3 (CO₂ + CO)) × C, from the molar masses 44, 32 and 28 over 12. The calculator uses exact molar masses.

Why is 4 % of the carbon shown as burnt to CO?

CO / (CO₂ + CO) = 0.5 / 12.5: that carbon released less than a third of its heat.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.