FireCADCalc

Extraction and Lost Juice vs Tandem Length (Hugot)

Lost undiluted juice % fibre and extraction for the number of rollers (Hugot eqns 20.17–20.18), and the expected bagasse sucrose ratio of two tandem lengths (20.19).

Sugar mill and cogeneration

Inputs

Examples: 15 rollers, R 14, 5 vs 7 mills18 rollers, R 12, 4 vs 6

Results

Hugot stresses that these are trends from Java figures and the Nth-root rule has no experimental basis.

Lost undiluted juice % fibre 500/N27.778%
Extraction 100 − 70/N (f ≈ 12.5 %)96.111%
Ratio of sucrose in bagasse, tandem a to b1.2301

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 15 rollers, R 14, 5 vs 7 mills. The inputs, in the units selected above:

InputValue
Number of rollers in the tandem15.000 -
Sugar content of cane, percent14.000 -
Number of mills, tandem a5.0000 -
Number of mills, tandem b7.0000 -

Applying the formula below gives:

ResultValue
Lost undiluted juice % fibre 500/N33.333 %
Extraction 100 − 70/N (f ≈ 12.5 %)95.333 %
Ratio of sucrose in bagasse, tandem a to b1.1628

Open this example in the calculator and change any input.

Formula

\(j = \frac{500}{N}\,\%, \quad e = 100 - \frac{70}{N}\,\%, \quad \frac{\sigma_a}{\sigma_b} = \frac{R^{1/N_a}}{R^{1/N_b}}\)

Variables

Symbol Meaning SI unit
\(N\) Number of rollers in the tandem -
\(R\) Sugar content of cane, percent -
\(N_a\) Number of mills, tandem a -
\(N_b\) Number of mills, tandem b -
\(j\) Lost undiluted juice % fibre 500/N -
\(e\) Extraction 100 − 70/N (f ≈ 12.5 %) -
\(\sigma_a/\sigma_b\) Ratio of sucrose in bagasse, tandem a to b -

Method and standards

Hugot's empirical trends.

Where it is used

  • Judging a tandem against others.
  • Estimating the benefit of an extra mill.

Common mistakes

  • Counting mills for N instead of rollers.
  • Treating trends as guarantees.

Assumptions and limits

  • Average imbibition (λ ≈ 2) and β ≈ 0.6; the extraction rule is for fibre near 12.5 %. Fibre and imbibition are not inputs, so the results are trends for that basis only.
  • In the Nth-root rule R is the sugar content as a percentage number (14, not 0.14), as Hugot writes it; the ratio depends on that scaling.

References

  • Hugot
  • Handbook of Cane Sugar Engineering
  • 3rd ed. (Elsevier, 1986)
  • ch. 20
  • eqns 20.17–20.19 and Table 20.2
  • pp. 322–323

Questions and answers

How much does a longer tandem gain?

Lost juice falls roughly as 500/N: from about 42 at 12 rollers to 28 at 18.

What is the Nth-root rule?

Hugot's suggestion that bagasse sucrose varies as the Nth root of sugar content for an N-mill tandem: a 5-mill tandem leaves about 1.16 times the sucrose of a 7-mill one at 14 % sugar.

Are these design values?

No: they are averages from published results, for judging whether a tandem does reasonable work.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.