Worked example
Example: 250 TCH, five mills, 1 mm DSM. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Crushing rate | 250.00 t/h |
| Number of 3-roller mills (crusher not counted) | 5.0000 - |
| Juice flow to the DSM screen | 260.00 m³/h |
| DSM bar spacing | 1 mm (7 500 L/h per dm) |
Applying the formula below gives:
| Result | Value |
|---|---|
| Cush-cush screen area | 20.000 m² |
| Area for the first mill | 7.5000 m² |
| Area for the second mill | 5.0000 m² |
| Area for each following mill | 2.5000 m² |
| DSM screen width | 3.4667 m |
Open this example in the calculator and change any input.
Formula
\(S = A(0.03 + 0.01N_m), \quad S_1 : S_2 : S_n = 3 : 2 : 1, \quad W = \frac{\dot V_j}{q_{dm}}, \quad q_{dm} = 7.5\ \mathrm{m^3/h\ per\ dm}\ (1\ \mathrm{mm}),\ 6.0\ (0.7\ \mathrm{mm})\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(A\) | Crushing rate | kg/s |
| \(N_m\) | Number of 3-roller mills (crusher not counted) | - |
| \(\dot V_j\) | Juice flow to the DSM screen | m³/s |
| \(\text{spacing}\) | DSM bar spacing | - |
| \(S\) | Cush-cush screen area | m² |
| \(S_1\) | Area for the first mill | m² |
| \(S_2\) | Area for the second mill | m² |
| \(S_n\) | Area for each following mill | m² |
| \(W\) | DSM screen width | m |
| \(q_{dm}\) | DSM capacity per dm of width, by bar spacing | m³/s per m |
Method and standards
Hugot's area and capacity rules.
Where it is used
- Sizing juice screens.
- Checking screens after a crush increase.
Common mistakes
- Counting the crusher as a mill.
- Using mass flow in t/h as m³/h without density.
Assumptions and limits
- Hugot's rules for normal preparation; fine preparation needs more area.
- The line 0.03 + 0.01 N_m reproduces Hugot's figures for four to six mills (12–20 rollers); outside that a note says the area is extrapolated.
- With two mills there is no following mill, so S_n is not shown.
References
- Hugot
- Handbook of Cane Sugar Engineering
- 3rd ed. (Elsevier, 1986)
- ch. 22
- screen area and the D.S.M. screen
- pp. 354–356
Questions and answers
Why does the first mill get the largest share?
It sends the most juice and the most fine bagasse.
DSM spacing?
1 mm as a first screen, 0.7 mm as a second screen; 0.35 mm for clear juice.
Are cush-cush screens still used?
Many new mills return juice with chokeless pumps instead; the DSM or vibrating screen then cleans mixed juice.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.