Worked example
Example: Typical bagasse. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Moisture % bagasse | 50.000 % |
| Pol % bagasse | 1.8000 % |
| Purity of last expressed juice | 75.000 % |
| Bagasse % cane | 29.000 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Brix % bagasse | 2.4000 % |
| Fibre % bagasse | 47.600 % |
| Fibre % cane | 13.804 % |
Open this example in the calculator and change any input.
Formula
\(Bx_B = \frac{Pol_B}{P_{LEJ}}, \quad F_B = 1 - W - Bx_B, \quad F_c = F_B\,B\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(W\) | Moisture % bagasse | - |
| \(Pol_B\) | Pol % bagasse | - |
| \(P_{LEJ}\) | Purity of last expressed juice | - |
| \(B\) | Bagasse % cane | - |
| \(Bx_B\) | Brix % bagasse | - |
| \(F_B\) | Fibre % bagasse | - |
| \(F_c\) | Fibre % cane | - |
Method and standards
Bagasse = fibre + moisture + brix.
Where it is used
- Daily mill control.
- Bagasse quality for the boiler house.
Common mistakes
- Moisture from a wet sample left open.
- Using mixed juice purity.
Assumptions and limits
- Routine analyses.
References
- Sugar factory chemical control (daily manufacturing report) definitions
- as compiled in SugarProcessTech
- Formulas for calculating sugar industry DMR
Questions and answers
Why the last expressed juice purity?
The juice remaining in bagasse resembles the juice from the last mill.
Is fibre % cane measured?
It can be, but the bagasse balance gives it every day.
Does fibre affect extraction?
Yes: more fibre holds more juice, which is why reduced extraction exists.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.